https://www.1aauto.com/nissan-altima-maxima-control-arm-with-ball-joint-pair/i/1asfk00144?utm_source=YouTube&utm_medium=description&utm_campaign=videodesc&utm_term=Vt_ZOYF5I0Y
1A Auto shows you how to repair, install, fix, change or replace failing, rusted, rotted, or damaged front lower control arms. This video is applicable to the 02, 03, 04, 05, 06 Nissan Altima.
✔ List of Auto Parts from 1AAuto.com Related to This Repair:
1ASFK00144
🔨 List of Tools Used in this 1AAuto.com How-To Video:
• 22mm Wrench
• 19mm Socket
• 21mm Socket
• Ball Joint Press
• Dead Blow Hammer
• Needle nose pliers
• Side Cutters
• 1/2 Inch Breaker Bar
• Ratchet
• Socket Extensions
• Torque Wrench
• Rust Penetrant
• Floor Jack
• Jack Stands
• Rubber Mallet
🔧 Instructions:
1. Removing the Wheel 0:25
2. Removing the Control Arm 1:02
3. Installing the Control Arm 7:06
4. Installing the Wheel 11:37
⚠ DISCLAIMER:
While 1A Auto strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. 1A Auto is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.
){kind=link}
Please i want to know what the duty of lower contrl arm in the vehical ???? How is working??
Please i dont have too much experience, what the benefit of lower control arm in the vehicle ???? I mean what the duty of lower control arm in the vehicle
I'm in the process of doing this now. The part at 9:30 is where I'm stuck. My ball joint is a full 1 1/2 inches almost 2 inches away from the knuckle. No matter which way I turn the wheel nothing lines up close enough to get the ball joint back into the knuckle.