We are finally lowering the Hardbody with a brand new Belltech rear lowering and front spindle kit. Complete lowering kit: https://amzn.to/2WTxYdh
Rear Lowering Blocks Alone: https://amzn.to/3o4ye5h
Street Performance Shocks: https://amzn.to/38SJmvU
Looking for how to do the front? Here is the video https://youtu.be/xDALmNv_op0
The kit comes with everything you’ll need to lower your truck about 3 inches from factory. We show you how to do it and what tools you’ll need so check out the video! Part 2 coming out next week!
Tools Needed:
14mm socket/wrench to remove bumpstop
17mm socket/wrench to remove shocks
19mm socket to remove U-bolts
Breaker Bar
Floor Jack
Jack Stands
Wheel Chokes
Check out the kit for all the mods we have in the Hardbody:
https://kit.co/flakegarage/nissan-hardbody-modifications
Intro (0:00)
Install Plan (0:53)
Complete Kit (1:46)
Rear Lowering Kit (2:37)
Prepping and Lifting Truck (3:22)
Removing Bump Stop (4:41)
Removing Shock (5:16)
Removing U-Bolts (6:20)
Installing Blocks (7:50)
Installing U-Bolts (9:47)
Installing Shocks (11:40)
Review and Final Look (12:54)
All links posted in my channel are affiliate links that help my channel keep producing great content.
#nissanhardbody #belltech #loweringblocks #nissan #hardbody #d21 #lowering #blocks #howtoinstallloweringblocks #howtoinstallbelltechkit #howtoinstallblocks #nissanhardbodyloweringblocks #nissand21loweringblocks #nissanhardbodybelltechinstall #440sp #belltech #streetperformance #streetperformanceshocks #howtoinstall440spkit #belltechsuspension
){kind=link}
Would the ride be rough with the oem shocks? With the blocks
What lowing shocks should I put on my hardbody, I am in high school and doing it as my senior project and lowing the truck is one of the things I have to do any suggestions?
Are the back shocks the same size as the stock shocks or the bell tech shocks different?
Great video what size tire did you run
Thanks for the video! I’m having some difficulty getting the second block to line up with the axle after putting on the first one. Did you guys encounter that, and do you have any suggestions?
So just out of curiosity what would happen if I didn’t change the shocks
Are 4” drop blocks with 2 degree taper bad to use ? On my 2001 single cab frontier ?
Where can i buy this kit?
Whats size of the front and rear shocks used