[updated 1/24/2018: Legal disclaimer added]
What does the Noise Filter Board have to do with a shorted Power Board? Watch this Tech Tips video to find out.
[updated 1/24/2018: Legal disclaimer added]
What does the Noise Filter Board have to do with a shorted Power Board? Watch this Tech Tips video to find out.
Comments are disabled for this post.
Is this the same for the MITSUBISHI CITY MULTI?
If the power board shorting is a common problem, why is the board designed that way? You didn't explain the underlying cause of the short. What is shorting? A transformer? A capacitor? A power transistor? The bridge? Which is it? If the power board is shorting, there is a reason. We need to know the reason if the underlying cause is to be fixed.
Great information
Thanks for the video =)
Why do you make it near impossible to access the power board on these things???
Hi Nice channel
I have Mitsubishi heatpump which heats up tp 30 minutes & upper green led blinks 5 times repeatedly plz help
After paying top dollar for your equipment there should be no shorted boards , this makes me rethink what system to buy.
where do you check your resistance on the power board? is it at the terminals where you removed the incoming power wires?
this is a great presentation please keep them coming
I have a MXY-3A28V condensing unit .The indoor unit displayed 5 blinks and outdoor 2 Red flashes.i checked the compressor and it was fine.i changed the power board any yet the system does not work.The compressor comes on for 06 seconds and shuts off.Could you help me with this.