This is a detailed video on how to install Eibach lowering Springs on a 2008+ Mitsubishi Lancer
Want these Springs?
Buy them here: http://www.autocityimports.com//2008-lancer-lowering-springs-c-54_2922_2947.html?osCsid=0ff59caebda9e498a4cf727b10f523a9
Have any questions? Email me at info@autocityimports.com
){kind=link}
LOWERING SPRINGS, what model and series did you use?
What a waste…..no pic of the car to see the actual ride height????steups
Nothing about the alignment of the spring seat to the shock, so the holes in both have to line up?
7:15 CANCER.
Don't clamp the strut like such. Scratches on them will accelerate wear out the dampers; that's a no no.
Where did you angle grind it? Like fully mangled or slightly.
how to install spoilet in mistsubishi 4g pleasee
will this damage the struts over time?
amazing tutorial!! If only they were all as good as this! thanks for this!!
hi man,, did you have any problen after, because i instaled lowering sprins, but in the front part is noisy i can hear two pieces of metal crashing
thank you
which is more stiffer the tein s tech or eibach?thanks
How do you remove end links if you strip them??? i'm going thru hell to get it off & still can't do it very frustrating
So on my front stabilizer bar link on my 2010 Mitsubishi Lancer ES has a semi-stripped Allen Key socket. You mentioned having to ruin the link to get it off, so I was wondering what you did to remove it. Spent 3+ hours on the single bolt trying various remedies and nothing.
Will this make the ride more stiffer? Sorry I'm new to all this.
This looks much more helpful than any other videos. I know which one I'm watching when I get my springs! Thanks man!
did you install a camber kit aswell? is a camber kit necessary? do you have pics of before and after??