Sorry for the audio. The road noise is bad in this video. Watch as I show you how to change an impeller on a Mercury 150 four stroke.
Thanks for watching and be sure to like, subscribe, and hit the bell to be notified when I upload more videos like this one!
Follow me here:
Instagram: https://www.instagram.com/reel_life_fisherman/
Twitter:https://twitter.com/reellifefishin
Facebook: https://www.facebook.com/Reel-Life-Fisherman-2096269250482400/
Edited by: Noctem Productions https://www.youtube.com/channel/UCexrmmim2_WThkGw0mid70w
I would like to add .. in saltwater I would not recommend putting loctite on the impeller housing bolts .. use perfect seal or a light coat of anti-seize .. the factory uses loctite there I wouldn’t personally..
can i use the o rings supplied in the kit 18-3214d in place of that beveled taller seal?
that is by a mile the best video on the internet for this. Thank you
I replaced mine after watching your video, I’m also is 150 four stroke, now it is making a noise and vibration coming from behind the cowling almost seems like it’s coming from the water impeller area ,not sure what it is , any info would be great
Well I have some bad news for you. You put your impeller in backwards. If you look back(9:29) at the one coming out, you'll see that the fins are bent backwards to the one that you installed. (13:26) I really hope that you have not damaged your outboard.
How long should it take to start peeing with muffs on and at first start? 10 seconds, 20, 30? Thanks.
Dude I learn so much about my boat from you. Perfect videos ! Thanks for #3 repair . I started out with you teaching me how to install a Minnkota Ulterra auto stow motor .
Great explanation of steps and logical reasons why they are taken
Great video!! You a lifesaver, Thanks again!
Very good detailed video. I can do this now. Thank you.
Thanks for the video. About to do mine next week.
It looks like the new impeller was inserted in the wrong direction. I would at least add a comment in the description of the video.
Another great instructional video! You are by far the best “How to” teacher on the web.
I’m a little confused on the bump start . How many times do you bump start . It also sounded like the camera picked up a engine sound was the engine running? T.I.A.
Are you near Sacramento? I have a 2020 75hp Murcury 4 stroke and I need my 3 year service. To be honest I don't really trust my local shop especially for what they're charging. Thanks for all the info brother!
say "Shift shaft" 10x fast
literally about to do this same job. You are a life saver!
Man this is the best how too Water pump R and R on tube.Well explained there is another with a 115 guy had tobacco or something in his mouth couldn't understand him.in a hurry dropping shit scratching things no details thanks you.this took me 35 minutes with my prop on.A+A+. William
Isn't the impeller put in the wrong direction,I know it will correct once the motor is started,but seems it would be rough on the impeller?
Very good informative video for the DIY at home. Ty
Very nice video. Haven’t decided whether I’ll change in neutral or forward. Since I’m alone I may go forward. Wish you’d give the plywood slot dimensions.