Learn how to install a new battery in a Mercedes-Benz E320. We’ll show you how to replace/change/remove with simple tips and tricks to help get you started!
Tool List: 10mm wrench, 10mm socket, 13mm wrench, flathead screwdriver, Torque Wrench
Although this video may provide you with the basic procedures, we recommend that you check with the vehicle manufacture’s step by step procedures found in service/repair manuals for the vehicle you are working on.
Even if your vehicle did not come with an AGM battery, you can upgrade to an AGM battery for up to 2x the life. AGM can be found at most retail outlets. You can learn more about AGM here: https://www.autobatteries.com/en-us/battery-technology-types/absorbent-glass-mat-agm-battery
The use of a memory saving procedure will keep the memory alive on the vehicle’s computer during the battery replacement procedure. Referring to our Memory Saving video will provide you with various memory saving procedures that can be used according to vehicle manufacturer’s requirements. https://youtu.be/vSP3ShcaFgQ
Some late model vehicles must have the 12 volt battery registered with the vehicle’s Battery Control Module or Computer after replacement. See these videos on Battery registration and coding for more details on the procedures at https://youtu.be/TGKohKZHzr0 & https://youtu.be/cxOK_DczRGg
Always wear safety glasses and gloves when working with or near batteries.
These cars are money pits
Fantastic tutorial. Just installed mine. Thank you
GREAT info. Great delivery. You nailed it!
About the front batterie
для чего это шланг??
Does anyone know if you need to reset the car’s sensors after replacing the battery? I have a 1998 e320 and the day after I replaced the battery, I started getting different sensors that come and go with one of them being the check engine electronics that hasn’t gone away. Any suggestions?
Thank you so much. My battery just died. I needed this vid to help❤