What made u change the coolant sensor what kinds of problems were u have
with your mazda?? I have a 08speed3 im change issues with my temperature
guage thnks.
Just change both and the code won’t come back again… Change the sensor
but after a few days it came back so then I change the thermostat. the code
never pop out again
I have the same P0128 CELDTC code on my 2006 Mazda 3 2.3L, but everything
I look up and see says it’s the coolant thermostat, not the coolant sensor.
Your opinion?
Did you end up changing the Thermostat yourself or did you take it to a
local shop? If you did it yourself, was it difficult and what tips do you
have? If it was a local shop, what was the cost?
Yes, make sure the motor is cold so you don’t burn your self. And after I
took off the sensor about 1- Cup of Coolant driped out. So make sure to add
back what you lost during the sensor change.
Hi Krazy, what code were you getting? I have a Mazda3 2004 is it located in
the same place? I already replaced the thermostat but the computer keeps
saying P0126 THERMOSTAT CONDITION LOW OPERATING, possible cause faulty ECT
sensor, please help
){kind=link}
P0128 is Thermostat, not sensor.
my car got fucked up because of this video
What made u change the coolant sensor what kinds of problems were u have
with your mazda?? I have a 08speed3 im change issues with my temperature
guage thnks.
Thanks bro very helpful I also got the code P0128 on my 05 Mazda6 2.3L
engine
Did you drain any coolant.Did you also did it when the car was cold or warm.
Just change both and the code won’t come back again… Change the sensor
but after a few days it came back so then I change the thermostat. the code
never pop out again
helpful video – thanks man
have the engine cold
I have the same P0128 CELDTC code on my 2006 Mazda 3 2.3L, but everything
I look up and see says it’s the coolant thermostat, not the coolant sensor.
Your opinion?
Did you end up changing the Thermostat yourself or did you take it to a
local shop? If you did it yourself, was it difficult and what tips do you
have? If it was a local shop, what was the cost?
the code I got was P0128 I changed both the sensor and the thermostat and
the code never came back
Yes, make sure the motor is cold so you don’t burn your self. And after I
took off the sensor about 1- Cup of Coolant driped out. So make sure to add
back what you lost during the sensor change.
is it the same forbthe 2007 I got the 2.3 also an tge engine light is on i
got it checked an its the sensor or thremostat
Hi Krazy, what code were you getting? I have a Mazda3 2004 is it located in
the same place? I already replaced the thermostat but the computer keeps
saying P0126 THERMOSTAT CONDITION LOW OPERATING, possible cause faulty ECT
sensor, please help