I kept messing with my lighter so much, now the button doesn’t click to
engage the spark. I think I was having a fuel issue, but now it’s a button
issue. :(
Great video! Was able to get my wife’s candle lighter working by draining
butane and refilling. Thanks! Be careful putting the knob back on, it’s
easy to turn the dial way to far and make a flame thrower! Scared the crap
out of my wife!
I hate those cheap butane canisters. They smell awful and they ruined one
of my lighters. Luckily it wasn’t an expensive lighter. It was just a
Chinese made lighter I got from Deal Extreme which I replaced. It’s better
to get the more expensive fuel for your lighters. I’ll stick with Zippo
butane. Even for my non-Zippo lighters.
Hi i have just bought a nentone gas lighter, Iv’e filled it as per your
video, but when I light it gas comes out of the roll bar at the side and
basically all over, I’ve had the gas turned right down, and left it for 10
mins, after which I maybe get a tiny flame, then its dead, any ideas
please, cheers .
just so you know when you release the gas you should do it for 10-20
seconds then wait a couple minutes then do it again for 10-20 second and so
on because the O-rings in the valve can get realy cold from the cool down
effect from releasing butane and actually snap and make the lighter leak
fuel and not work right. O-rings are not expensive but probally hard to
replace in some lighters.
mine still won’t work after trying that. i can see a spark and i can hear
fuel coming out like it should, but there’s no flame. anyone know why?
Wtf my butane gas cant even fill up it just keep spilling out and not
fueling my lighter
is Ronson Butane no good?
I press but I didn’t hear the gas pump up. What happened? How to fix it?
Putting new gas in is NOT “fixing a broken lighter”
You mentioned to not use cheap stuff like Ronson for butane. However,
seeing as it is now owned by Zippo, would that be okay?
what a waste of time this vid was. send it back to zippo they will fix it
or send you a new one. lifetime guarantee
I kept messing with my lighter so much, now the button doesn’t click to
engage the spark. I think I was having a fuel issue, but now it’s a button
issue. :(
common sense is so rare these days ,it should be considered a super
power.lol
“This cap is ridiculous”
I don’t hear any gas leaking and I can’t get mine to work. It sparks but it
wont even fill. :/ any suggestions
Thanks Jeff great video. I learned alot
Great video! Was able to get my wife’s candle lighter working by draining
butane and refilling. Thanks! Be careful putting the knob back on, it’s
easy to turn the dial way to far and make a flame thrower! Scared the crap
out of my wife!
u are sooo stupidddddd!!!!!
I hate those cheap butane canisters. They smell awful and they ruined one
of my lighters. Luckily it wasn’t an expensive lighter. It was just a
Chinese made lighter I got from Deal Extreme which I replaced. It’s better
to get the more expensive fuel for your lighters. I’ll stick with Zippo
butane. Even for my non-Zippo lighters.
@paintballhead03 Well refilling $1 bic is not worth it 🙂
Is it safe to purge the fuel, indoors, wont it still kind of stick around
in the air?
Isn’t that dangerous to do indoors? Letting the fuel out I mean.
Wouldn’t you get better results if you held the lighter upside down when
you purge it? That would allow the gas to pour out.
what about ronson butane
my wickie pipe lighter just won’t light. i need help someone please help me
out all i get is the spark and thats it. SOMEONE HELP!!!
My old ronson butane lighter is completely fkd
i use cheap lighter juice for campfires…
Hi i have just bought a nentone gas lighter, Iv’e filled it as per your
video, but when I light it gas comes out of the roll bar at the side and
basically all over, I’ve had the gas turned right down, and left it for 10
mins, after which I maybe get a tiny flame, then its dead, any ideas
please, cheers .
Get Zippo Butane and do another video to prove your point
Jeff where can i get torx bit screwdriver? prefferebly the entire set?
Silent but violent.
just so you know when you release the gas you should do it for 10-20
seconds then wait a couple minutes then do it again for 10-20 second and so
on because the O-rings in the valve can get realy cold from the cool down
effect from releasing butane and actually snap and make the lighter leak
fuel and not work right. O-rings are not expensive but probally hard to
replace in some lighters.
When you are filling there will be a small amount of air in the stem of the
bottle of butane that gets shoved into the lighter.
@starcraftluver62 – No thier names remain the same.
abrupt start?