how to replace the front strut on a 2003 lincoln town car
03 Lincoln town car front strut replacement
10,127
Like
Save
){kind=link}
Comments
Comments are disabled for this post.
how to replace the front strut on a 2003 lincoln town car
Comments are disabled for this post.
Man, I sure appreciate you keeping this video up. We've all been there, trying to figure things out, working the long way around a project. Thanks for putting socket sizes in there, helped.
Wrong way ! LoL
You have courage to take on that job. Mine is leaking on the passenger side. Thanks for the info.
Unscrew strut assembly completely, take nuts off the 2 bolts on the upper control arm, take off sway bar link ,.. move the strut assembly around to take out upper control arm bolts..push down on the rotor.then assembly comes out. 30min from start to finish each side. I put a PI strut assembly on both my 03 & 07 town car, handles much better and raises the car. I hope this helps
All you need to do is remove the upper ball joint and the lower bolt from the sway bar link from 2003/2011 very easy just did on a 2008 Town car.
I’m replacing both strut assemblies in the front. Upper and lower control arms. Inner and outer tie rods. I have an 03 town car. Wat else should I replace? Any advice?
Lol this made me change my mind about doing it myself
Thank you for making this video bro
Wow,what a nightmare…Good job…
What all dod you need to remove? Been thinking on doing my front suspension replaced. Specifically the struts and upper control arms. It's the same for the 2011 model year right ?
Bro you did all that for nothing. O DOD it with just taking upper control arm out the way and use a high pry bar to take out the strut.
There’s more than America watching you know