dodge death wobble fix for 2nd Generation DODGE Ram Trucks1994 to 2001 More information on this topic will be able to be found at http://www.dodge-steering-column-rebu… or contact us at order@performanceforge.com for the DODGE-STEERING-COLUMN-REBUILT-BUSHING
){kind=link}
Hi is there any way I could order this kit
My issue is behind the part you replaced. The gear shift collar wiggles around inside the housing that goes into the firewall. The shif lever rattles. How do I fix that?
how can this plastic last longer than a bearing the steel parts are going to grind the plastic away quickly
free of greece, that's funny, this video went from a mechanical how to fix to a heartless geopolitical social engineering how to fix, went to a dark place real quick
I’ve lost my patience with you
Thank you for posting
Where can this bushing be purchased
Thanks, I would have never seen that retainer without this video. I was not able to nibble the retainer like you but I pried the spring around the retainer with a flathead screwdriver until eventually the spring and retainer popped off. I did not bother removing the shifter linkage. I replaced all front end rubber parts which fixed a ton of slop, then this tightened up the feel. Unfortunately a little slop remains and I believe it's the gearbox so that's next.
Thank you for sharing this video. Again, thank you.
Is it me or were parts left off when new bushing installed ???
Thank you. This is the first video that adequately showed me how to remove the factory parts correctly.