Car Fix DIY Videos

Shop for New Auto Parts at 1AAuto.com http://1aau.to/c/136/H/pcv-valve

This video shows you how to install a PCV valve on your 1997-2006 Jeep Wrangler (2.4L). The positive crankcase ventilation (PCV) valve is responsible for managing the pressure within the crankcase of the engine. Excessive pressure can interfere with efficient operation. If the valve is clogged or otherwise damaged, you may experience poor running conditions in your vehicle.

Estimated installation time for a professional technician is approximately: 18 minutes

This repair was done on a 2003 Jeep Wrangler SE 2.4L Sport Utility 2-Door 4WD Manual and the process should be similar on the following vehicles:
1997 Jeep Wrangler
1998 Jeep Wrangler
1999 Jeep Wrangler
2000 Jeep Wrangler
2001 Jeep Wrangler
2002 Jeep Wrangler
2003 Jeep Wrangler
2004 Jeep Wrangler
2005 Jeep Wrangler
2006 Jeep Wrangler

Tools you will need:
• 10mm Socket http://1aau.to/obSh/1AXAA00017
• Ratchet http://1aau.to/ocjK/1AXAA00016
• Gloves http://1aau.to/obqZ/1AXSS00048
• Safety Glasses

Subscribe: https://www.youtube.com/channel/UCWCdsftsTqYMO7cA_5Sc-yA?sub_confirmation=1

⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.