How did the vibration start? Did you lift it or change anything on it? If
it just started out of nowhere check: Transmission mount ( mounts sits
between skid plate and tranny/ tcase )Check all the U joints Check all your
control arm bushings If you changed something like put on or took off a
lift check your drive shaft angle Do you have a stock drive shaft or a slip
yoke eliminator kit (SYE) ?Let me know what you find
When i take out the driveshaft should I leave the short one just hanging
their ? Or how does that work I have the same vibration problem Please
please help
Ya , I checked the tranny mount and It was trashed. I replaced it , I
replaced the Skidplate , put another driveshaft also balanced it , no
noises in the rear diff and it’s still vibrating at around 20-30 mph ..
how big of a lift do you have on your jeep? is your rear yoke pointed
straight to the tcase ? let me know how your jeep is set up. there are a
few differnt ways you can solve the vib. problem
I have a 4″ lift or a little bit more than that … Also have a 1″ motor
mount lift and no transfer case drop … The different yoke is straight and
not pointed towards the t case. It was fine till I went wheeling one day .
){kind=link}
I have the same issue and lift brand but 6 ” long arm
How did the vibration start? Did you lift it or change anything on it? If
it just started out of nowhere check: Transmission mount ( mounts sits
between skid plate and tranny/ tcase )Check all the U joints Check all your
control arm bushings If you changed something like put on or took off a
lift check your drive shaft angle Do you have a stock drive shaft or a slip
yoke eliminator kit (SYE) ?Let me know what you find
When i take out the driveshaft should I leave the short one just hanging
their ? Or how does that work I have the same vibration problem Please
please help
Ya , I checked the tranny mount and It was trashed. I replaced it , I
replaced the Skidplate , put another driveshaft also balanced it , no
noises in the rear diff and it’s still vibrating at around 20-30 mph ..
if you havent yet make sure your tranny mount is good that can also cause
vibration problems
how big of a lift do you have on your jeep? is your rear yoke pointed
straight to the tcase ? let me know how your jeep is set up. there are a
few differnt ways you can solve the vib. problem
Did you ever put that SYE on , and did it fix the problem ? I have the
exact same issue..
I have a 4″ lift or a little bit more than that … Also have a 1″ motor
mount lift and no transfer case drop … The different yoke is straight and
not pointed towards the t case. It was fine till I went wheeling one day .
hay man thanks for the tips .. got the same problem
I posted a video of my rear driveshaft spinning check it out please .. Let
me know if it looks anything looks yours did.
yes installed the sye kit and adjustable upper arms that fixed my problem i
can give you more info if needed