Jaguar XJR Supercharger Snout Replacement

Jaguar XJR Supercharger Snout Replacement

Jaguar XJR Supercharger Snout Replacement. Replacing the supercharger snout on the Eaton M112 with a powerhouse UK rebuilt snout and 10% (2.5psi) pulley. This shows how we removed the old snout, installed the new one along with our findings along the way!

We are getting closer to having the X308 XJR back on the road with more power and reliability than ever before!

Be sure to follow us for more videos on this car as well as other in the Low-Tech fleet!

Facebook: @lowtechglobal Low-Tech
Instagram: @lowtechglobal
Estore: http://lowtech.deco-apparel.com

21,895
Like
Save


Comments

@davidcrouch3226 says:

Pro tip on the supercharger oil: the Chevy dealers in NA will sell it at half the price of the online sources.

@robertbaumann4742 says:

I may not be your best friend… But you’re mine… Thank you so much for the instructions

@ravirajah2010 says:

what pulley is this 10% or 6% ? what belt did you have to use?

@mikediscomd says:

Had mine done at powerhouse- best £400 I’ve ever spent!

@gregdettling6693 says:

@ Josh

Just finished an oil change on my 98 XJR black on black.
They did a great job here in downtown Toronto on 10/11/2024 just last Friday.
Drained the old oil out for over 1 hour over their lunch break.
Ran new 5w30 Castrol into it. 5 L
FULL SYNTHETIC
Topped the rest of it up myself.
It took almost 1 L more to get it up.
I chanted my oil before 6000 km
About 3700 -3800 miles

@peterdavey2767 says:

Outstanding, on how to, you take the process slow so we can fully understand process thanks

@mankenybom9344 says:

Imagine if you for once could watch a youtube video WITHOUT that goddam muzak…! I would be so so happy to get rid of that noise pollution…!!

@raymonterence2726 says:

..Yes brilliantly shown and exspained …..I own 1998 xjr supercharged and live in the canary Islands I watched supercharger oil change great confidence giver ..wen most mechanics I've found here are ex tyre fitters …it seems…thankyou

@joserayos5757 says:

Do you know if there is any chips for these car

@alanbeaupre2533 says:

Can you do this with supercharger on the car?

@Herve747 says:

Nice job, did you feel the power difference ? I'm plannig to do the same on my 2002 XJR 100.

@Gixxer_fan_boy says:

Did you use any sealant when bolting up the nose ?

@alekjuskevice says:

Is there a gasket between the snout and the main body of the Supercharger ?

@josephmcmahon6051 says:

Seems relatively straightforward

@alekjuskevice says:

The explanation is great, thank you! The music is unfortunate.

@MrElvin1975 says:

Would this be the same supercharger and process for the 4.2 str ? Thank you.

@johnthornton224 says:

Jaguar doesn’t have a W in it so say it properly

@issamsonalla4708 says:

Hi quick question, not sure if you have mentioned it in the video, but does the car require a tune for the smaller pulley? Thanks

Comments are disabled for this post.