G’day Guys and Gal’s
In this video I show you all of the steps necessary to install an All Terrain Industries 30mm Diff Drop to your Isuzu Mu-x or D-max.
I also talk you through the advantages of fitting a diff drop kit to your IFS 4wd and also when it is necessary.
If you would like to get yourself a diff drop or check out some of the other products available from All Terrain Industries then follow the link and check out there website – https://atindustries.com.au/
For 5% off at the checkout use code – LOWRANGENICK
I have fitted every modification to the MU-X myself and really enjoy filming and teaching you guys how to do the same to your own 4×4 vehicles. The modifications I have done are listed below –
-AFN Bull Bar
-AFN 9″ LED Spotlights
-Domin8r Extreme 12000IB winch
-AUXBEAM S3 LED Foglights
-Oricom DTX4200 UHF Radio with Town and country Aerial Kit 3dbi + 6.5dbi
-Atturo Trailblade M/T – 265/70r17
-Fuel Vector – Fuel off-road racing rims – 17×8.5 Pos 7.4mm offset
-Outback Armour Expedition H/D Lift Kit
-ECU Shop Super 4 Touch Tuning Module
-HIKEITX9 Throttle Controller
-SCF Flat step rock sliders with checker plate – Satin Black
-Genuine Towbar
-Full size 265/70r17 A/T spare on steel rim
-Custom rear draw setup
-CF50 Waeco Fridge
-Giant 85AH AGM secondary battery
-Redarc BCDC1225D Smart Charger
-TITAN 900mm Single draw
-Genuine ISUZU Floormats
-ILANA Neoprene Seat covers
-Dashmat
-Provent 200 Catch can kit from Western Filters
-Diff, Transfer, Gearbox Breathers
-LED interior light upgrades
-LED reverse light upgrade
-Engine bay HPD Bling Parts
-All Terrain Industries Hard Intercooler Piping Kit
-All Terrain Industries 30mm Diff drop
Thanks a lot for watching guys! If you enjoyed this video and would like to see more videos like this. Please like and Subscribe to my channel : )
LowRangeNick –
Instagram – https://www.instagram.com/Lowrangenick/
Facebook – https://www.facebook.com/Lowrangenick/
The awesome background music is thanks to –
All Night by Ikson https://soundcloud.com/ikson
Music promoted by Audio Library https://youtu.be/bE2rrcUKnok
){kind=link}
Hey Guys!
Here's a link to the Diff Drop !
https://amzn.to/3qdg95L
Cheers ๐
Thanks man I have to do that for my Colorado and itโs going very good. Great video I love it
Hi Nick, got a question: wouldn't a fully adjustable upper control arm will help the CV levels too? (Or you already have it and it's still not enough?)
Love your videos they give me some inspiration
Hey nick. I got the same one for the dmax. The holes for cross member donโt line up. Did you have this problem? Drill em out bigger?? Your advice would be appreciated. Thanks
discount code no longer works
What bash plates have you put in that fit with the ATI diff drop?
Great vid mate, used the code and just installed the diff drop! Saving up for the diff locker and some bash plates now. Keep it up
Been watching your Videos…..excellent content and extremely informative…..warm regards
Hi Nick
Love your videos. I am in the process to install a diff drop (like yours) on my Dmax , fews questions:
how much torque NM do you tighten the four bolts on the cross bar and the two long ones to the chassis?
In the kit there is an oval sort of washer …any use for it? i have not see you using it .
Thanks
Al
Could this be done without jacking the car up?
Hiya, apologies for the long comment. But I'm hoping you can help. So the general thoughts are, you only need a diff drop for a lift 2'' (roughly 50mm) or more. Correct? So over here in the UK, I can get an ISUZU APPROVED Pedders 1.75'' lift kit for my D'max. Won't hurt the warranty of the vehicle and so on. Sounds great. But why, if a diff drop is for 50mm or more, are the diff drops so small? Only 30mm? Even after fitting one, you still wouldn't be bringing it back to the factory height right? I mean, I could fit one to my D'max after the very small 1.75'' Pedders lift, and it wouldn't even bring her back straight. So why am I advised I don't need one unless the lift is over 2'', and if that's the case, why don't they drop the diff further? Just none of it is adding up to me? Regards.
Hey Nick. Very useful channel you have ๐ I would also like to see a vid on changing out the CV joints. I am not putting the drop in because I only have around 40mm lift but fear I may need to change a cv in the bush one day.
Hey mate, Did you worry about doing the ATI 16MM BALL JOINT SPACERS at the same time?
do you have to get anthor wheel alignment?
Hey Nick awsome video just question do you need to do wheel alignment once installed diff drop ?
Cheers
This will be exactly the same on the dmax?
If you lower it 30 mils .. sort of defeats why you lift it
love ur work nick… but…. get some decent bash plates man!!