This is a helpful how to video on installing smoked film from http://www.metrorestyling.com/category-s/1067.htm.
This is a helpful how to video on installing smoked film from http://www.metrorestyling.com/category-s/1067.htm.
You must be logged in to post a comment.
){kind=link}
Another option is to use VHT Nightshade and apply to desired tint. No
bubbles, scuffs or ageing.
I can’t get the wrinkles out on my headlight when it angles
Wish I had three arms.
Is this the dark or light tint?
What size sheet is needed for the tailight of a 2011 dodge charger?
COMO SE MONTA EL FILMS TAILIGHTS
doing this today
Which percent tint is this. For the exact one on the video
illegal
What brand of vinyl is that is it oracal?
Yes with 2 drops baby shampoo
where would you buy the tools needed for this
metrorestyling . com
what is the name of tint paper that you used??
Yes! And it shouldn’t leave any residual
hindu style! cheap as fuck
Hi I wanted to know what setting should I have a hair dryer on if im using
instead of a gun? Very good how to video!!!!!
@metrorestyling Ok thanks a lot! =), I’m about to do this to my car.
depends on your state’s tint laws.
thanks alot for the instructions , got a question tho What are the lens
film rating did you use in this video? Smoke (Dark) Film: 78% Light
Transmission or Smoke (Light) Film: 92% Light Transmission? because i’m not
sure which one to buy. thanks.
is this the light or dark smoke
If I didnt have any RapidTac, can I use water?
Hi it is the Dark smoke 78% Light Transmission. Thanks
1 drop of baby shampoo or 2 drops to 32oz of water. Thanks
Yes same method
is there any possibility of the film actually slipping off in about a few
months time under moderate conditions such as rain ?
man so good, have you cant make tinting my honda accord 1993 cb7 ???
Hello please call us or email us youtube does not allow us to post the
links here. Thanks
will the cops hassle me for this tiny mod
Yes
@hiddenangel89 Yes but put 2 drops of baby shampoo. Thanks
i bought the heat gun at lows and you can either order the tint pre cut or
get a tint roll at autozone or any tint shop. i just did my lights and it
was extremely easy.
where can i buy it? or did you get it in the internet?
Well, to tell u the truth i didnt use any kind of liquid and the bubbles
are kind of still visible although they did kinda get smaller and the
wrinkles around it almost completely gone. Now for the 1080 carbon fiber i
did use some invisible glass to stick it on my pillars n move them around
and bubbles were not visible until it got hot outside now they look crappy.
Anyways what is be best way to get rid of bubbles when you install them. Do
i press hard with the squeguee or soft? OR what???
How do i avoid bubbles? I installed the light smoked tint on one of my
tailights and after an hour or two it started to bubble up.
Metro smoke vinyl
Hi it is dark. Thanks
Could I do this to mine if I’ve never done it before?
wow too much work. I’d go with the night shade paint
Yes
good stuff!
Man saw this video and makes me want to do my lights already. Can’t wait to
get my shipment should be here any day now :^) i hope is this easy when i
try to do it :^D
hey i want to do this but if it does not look nice or somethin can i just
peal it off
That looks horrible
i just don’t get the point of it.
@wonga619 Hello no way once it is on and the liquid is evaporated the only
way it will come off is with heat and forcefully pulling it. Thanks
I prefer to smoke it all HAHAHa dont care about the reverse light ^^