Today I will be replacing a headlight bulb on a 2013 Hyundai Genesis Coupe! Anyone can literally do this job by yourself, even if you never done it before, that’s how simple it is!
Below I have the tools listed below you’ll need to do the job!
– 10mm Socket
– Flat Head Screwdriver
– Cross Head screwdriver
– Brand New Bulb (of your choice)
Thanks for watching and supporting y’all! Please consider leaving a like, and subscribing to support!
')){kind=link}
what year is your Genesis
I’ve got my Saturday morning coffee and about to replace both low beam bulbs. Let’s do this!
Thank you for posting this walkthrough video. After doing this I would recommend removing the front bumper. It only takes 5 minutes (1 screw each side and push pins in the front) and makes it WAY easier to get the headlight assembly in and out of the body. Thanks!
Appreciate the video. Straight and to the point for beginners like me!
I can add extra tips as I have had to do this twice. Do everything in the video, they remove the three bolts holding the fender in place. Use a screwdriver plastic or rubber handle to hold the fender out some. You can do the same thing to the plastic and metal part on the front near the light assembly. Take a flathead screwdriver and get it under the plastic assembly at where the assembly bolts to the vehicle. Wiggle and GENTLY pry up on this screwdriver and if you are lucky it will quicly pop the assembly loose. The rest is easy,
Thanks man!
Well that was a first when I heard the Philips screwdriver being referred to as a "Cross Head" screwdriver. I've never heard one called that before. Ya learn something new everyday I guess.
My bulb literally just went out… thank you for posting this video really helps!!
I didn’t have a screw in that one thing u were talking about either
Always change the bulbs in pairs.