Sorry I am not sure how to tell you without seeing it, but take your time
and look around the piece to see if there are other screws or clips holding
it in. You should not have to cut anything to get to the light bulbs. gl
Just buy a basic tool set from harbor freight or walmart with screwdrivers
and metric sockets and you will be fine. I think they were 8mm nuts for
this car but not a 100%. GL
Thanks for posting this. I had my reverse light go out and though I could
not see it from the video i am assuming it is a like socket at the lower
part of the tail light assembly. Very well done.
Thanks bro! Just changed the bulb on my 2002 Elantra GLS. Had my 5yr old
son w/ me holding my iPhone playing your video while I changed the bulb.
Removing the tail light from the car wasn’t as easy as you made it look,
probably because you’re a pro and I’m an amateur, but your video made it
operation success. My son thinks I’m a freaking superhero now! Great job
and thanks again!!! Great work. Keep it up!!!
I didnt have any problems with the exhaust manifold on this car, are you
having an exhaust leak? you might need a exhaust manifold gasket, or the
flange gasket where the exhaust manifold connects to the pipe. Tx for
watching!
Haha thank you very much for your comment, glad you got it done. I
sometimes make the videos easier than they look in general. It helps
encourage people to do the work!
Thanks for your help a lot. I have problem. there seems to be a black
rubber plastic sticking out where the screws are located. it seems that it
is the last thing holding on to the light and the car’s body. how should i
remove it?it looks like a cover for screws, however it cant take it out and
dont know what is behind it. i have already took out three screws. is this
another one? should i cut the rubber ad see whats underr it holding the
light case?
Really helpful and easy to follow. Much clearer than the instructions in
the Hyundai manual. Thanks for your help!
Sorry I am not sure how to tell you without seeing it, but take your time
and look around the piece to see if there are other screws or clips holding
it in. You should not have to cut anything to get to the light bulbs. gl
Just buy a basic tool set from harbor freight or walmart with screwdrivers
and metric sockets and you will be fine. I think they were 8mm nuts for
this car but not a 100%. GL
Thanks for posting this. I had my reverse light go out and though I could
not see it from the video i am assuming it is a like socket at the lower
part of the tail light assembly. Very well done.
Thanks bro! Just changed the bulb on my 2002 Elantra GLS. Had my 5yr old
son w/ me holding my iPhone playing your video while I changed the bulb.
Removing the tail light from the car wasn’t as easy as you made it look,
probably because you’re a pro and I’m an amateur, but your video made it
operation success. My son thinks I’m a freaking superhero now! Great job
and thanks again!!! Great work. Keep it up!!!
Nice my 2002 elentra light just went out hopefully its the same!!
Thanks . jus replaced it on my 2004 GLS, 5 speed. got anything on
tigntening the nuts to the exhaust manifold for better, smoother
performance??
I didnt have any problems with the exhaust manifold on this car, are you
having an exhaust leak? you might need a exhaust manifold gasket, or the
flange gasket where the exhaust manifold connects to the pipe. Tx for
watching!
Very helpful! Thank you…
np thanks for watching.
thank you for posting I just fixed my rear brakelight on my 2003 elantra
with your guidance! thanks again
Hey do you know the size to the bulb
Haha thank you very much for your comment, glad you got it done. I
sometimes make the videos easier than they look in general. It helps
encourage people to do the work!
Thanks for your help a lot. I have problem. there seems to be a black
rubber plastic sticking out where the screws are located. it seems that it
is the last thing holding on to the light and the car’s body. how should i
remove it?it looks like a cover for screws, however it cant take it out and
dont know what is behind it. i have already took out three screws. is this
another one? should i cut the rubber ad see whats underr it holding the
light case?
np thanks for watching.
you’re a sweet fella
And the parts store closed right now do u think walmart sells it
what tools did you use? Which size for the nuts? I want to do this job
myself but I have zero experience dude.