Purchase the part shown in this video here. http://www.ebay.com/sch/Car-Truck-Parts-/6030/m.html?_ipg=50&_sop=12&_dmd=1&_ssn=www.1aautomotive.com&_from=R40&_…
Purchase the part shown in this video here. http://www.ebay.com/sch/Car-Truck-Parts-/6030/m.html?_ipg=50&_sop=12&_dmd=1&_ssn=www.1aautomotive.com&_from=R40&_…
You must be logged in to post a comment.
){kind=link}
My drivers side window clips became loose and the glass kept separating
from the regulator. The clips remained on the regulator and the glass
separated from the clips. I used JB epoxy and glued the clips to the
window. I just repaired it this morning and it seems to working fine now.
Thanks for the detailed video, It made the job go a lot faster.
You may want to take the door panel off to see if there’s anything wrong
with the window regulator. 1aauto.com 888-844-3393
My Hyundai Elentra’s passenger window just stopped 4 inches from closing.
It made a snapping noise, do you think that the regulator broke and needs
to be replaced? what do you think it could be, any advice would be greatly
appreciated. Also around how much do you think it would cost for me to fix
it? Thanks:)
Normally there is a special glass epoxy that you can pick up locally at
either a glass shop or even the dealer.
What type of material attaches the window itself to the brackets? The
brackets then attach to the window power regulator. I ask because my window
became loose from the brackets and I am trying to find a new type of glue
that will bond to the plastic and glass. Thanks for the help.