Visit our Amazon store: https://www.amazon.com/shop/hummansunson
How to Replace Upper Control Arm in SUV and Pickup – Hummer H3 Chevrolet Colorado GMC Canyon
#hummerh3 #chevroletcolorado #gmccanyon #suspension #frontSuspension #howtofixcar #hummer
Step by step Upper Control Arm Replacement
Raise and support the vehicle.
Remove the tire and wheel assembly.
Support the lower control arm at ride height.
Remove the wheel speed sensor bracket bolt.
Disconnect the wheel speed sensor brackets.
Disconnect the front brake hose from the upper control arm.
Disconnect the upper control arm from the ball stud by removing the pinch bolt.
Remove the upper control arm nuts and the adjustment cams.
Remove the upper control arm bolts.
Remove the upper control arm.
Install the upper control arm.
Install the upper control arm nuts and the adjustment cams. Do not tighten.
Connect the upper control arm to the ball stud by installing the pinch bolt. Tighten the nut to vehicle spec.
Connect the wheel speed sensor brackets.
Install the wheel speed sensor bracket bolt. Tighten the nut to vehicle spec.
Connect the front brake hose to the upper control arm.
Install the tire and wheel assembly.
Remove the lower control arm support.
Lower the vehicle.
With the vehicle at ride height, tighten the upper control arm nuts. Tighten the nut to vehicle spec.
Verify the wheel alignment.
Disclaimer: This video is for entertainment purpose only! NewRoad assumes No liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. Please consult your qualified auto technician to avoid injury, death, car and property damages.
Disclosure: As an Amazon Associate I earn from qualifying purchases
NewRoad Adventures Copyright
){kind=link}
WHERE do i get those beefy tie rods????
Im doing this right now , ive done control arms on tons of other vehicles but this h3 sux , im assuming you dont live where u get much rust lol these fuckers are not coming out , frozen inside the collars
Which upper control arm did you go with?
What upper control arm nits and adjustment cams you use? Just went to get my alignment done and guy said he couldn’t do the full alignment due to upper control arm won’t move up and down to adjust and that I have to replace it by torching bolt off or sawing it off cause it’s all locked up. Have the 08 Hummer H3
Hi there , better to remove the Shocks , so the Bolts can come out easily , and
the Brake line should be opened to facilitate the take out of the bolt of the right
side bolts , but you did it anyway , very good .
And your car needs ANTI RUST treatment , a good thick layer of Grease anti rust .
How will you know when to replace a upper control arm?
New to the channel,I've owned my h3 for 13 years with few problems love it.now I got to watch all you're videos. Peace
How do you like those shocks? The remote res bilstiens look awesome. I can’t decide.
Good job bud!! I almost made my first vid a few weeks ago on installing wheel hub assembly lol I need to replace my fuel pump to, noticed you did the skid plate removal but didn't see anything on the pump itself,IDK I might do a vid on it, anyhow I was really wanting to ask your opinion on if the Fox shocks are worth the money? Thanks for any info