Replace those ugly OEM front signals with these sleek and sexy LED flushmounts on your Honda Grom. For more info see: http://tstindustries.com/Honda-Grom-LED-Flushmount-Turn-Signals.html?utm_source=YouTube&utm_medium=GROM_FLHO1_install&utm_content=description&utm_campaign=2015_YT_PRODUCTS
Make sure to subscribe here: http://bit.ly/1jq2ZrN
Follow us on Facebook here: http://on.fb.me/1nuTjlF
Follow us on Instagram here: https://www.instagram.com/tstindustries/
Follow us on Twitter here: https://twitter.com/TSTIndustries
The Honda Grom LED flush mount turn signals from TST Industries fit directly into the headlight cowl without any modifications to your bike. With a ten minute instalation time they clean up the body lines and give you a sleek and sexy look. The wires of the signals terminate in bullet connectors. For a true plug and play hook up, you can opt to add our harness converters to further simplify the installation. Please follow the link above for more detailed information and photos of these signals installed on the Grom.
){kind=link}
i was about to buy a set and then read the advised terms and conditions which suggested they may not be considered street legal in some states. do you know if California is one of those states…?
You got any specs on the 4 bolts? I bought used from a friend and it's missing one.
Hey! What size tools did you use for this?
Is the bullet connector a 3-2 or a 2-2?
Woohoo! Done with all the adjustable fender elim and flush mount signals, it’s midnight, time to start on my exhaust lol. Thank you for the helpful videos and quick shipping, ordered Monday, came on Wednesday morning. Wasn’t able to get my license plate light working, but whatever I’ll get that figured out eventually.
Are these 3-2 or 2-2 signal converter plugs? Thanks
Does this work for 2018 model?
Does the relay work with other LED indicators?
there is simpler way then doing the wrench at end just twist the light a couple more times it will tighten itself after hand tight and then you wont strip it. i had to use washers because my nut was sitting in there funny. i might have over tighten one or the bottom thread is a little messed up in mine ill have to get a 2nd washer on one side later on but its tight enough as long as some kid doesnt come up to it and start playing with it when im not near the bike. it does make the bike a lot more sleek/stealth looking with this mod and doing the bar end mirrors but reversing them so they are just under your hand so you can still lane split easy. and i even did one mirror under my throttle hand and it doesnt even get in way. and i can still see both sides around me since there is lots of 6 lane streets here so it helps to have two mirrors. but ya 2 simple bar end mirror 40 dollars.. compared to 80 dollars for one lane splitting bar end mirror that folds… and this 40 dollar mod makes the bike look a lot better. and its like why doesnt it come like that….though it would be nice if they were also running lights.. but for how cheap they are cant complain.
Having extreme trouble getting the bottom bolt off and the screw on the turn signals. Any suggestions?
Just installed these today. This video makes the installation simple. I just hope the plastic nut doesn’t vibrate loose.
Do you ship UK ?
got the smoked out ones….they are BALLS.
About to buy a pair from you guys! Install seems pretty straight forward.
will the relay for this work also if you use the MNNTHBX fender eliminator kit with the integrated LED taillight?
just bought this kit it's the best kit ever TST industries is the shit! recommend them to anybody
2-2 or 3-2 converters?
that's alot
Thanks. Just installed these, along with the connectors and relay, on my 15 Grom using this video. I have one arm in a sling and was still able to install. Easy peasy. You guys have anything like this that'll fit the front of a CB1000R?
I will buy it for sure sign me up! White halo
Will the cbr halo signal work for the grom?
I have these… but… is there a way to have the front and rear signals stay on until the lane indicator tuned on and start blinking? having these installed makes it more dangerous riding at night.
Do you have a video on how to change the stock Headlight to LED bulb?
Can I put these on my rear turn signal as well?
How the heck did you remove the screws behind the turn signals?!
Will the stock rear turn signals work with the LED flasher relay?