Replace belt on Honda mower. HRN216 and others. The easy way. Easy DIY repair.
Quick and easy repair to fix Smart Drive Self Propel. Step by step instructions.
Honda OEM Belt: https://amzn.to/3NpxeGN
Honda OEM Drive wheels: https://amzn.to/43X0BqZ
Try Amazon Prime for Free; https://amzn.to/3L88YHP
Try Amazon Audible: https://amzn.to/41chz2Y
Try Amazon Fresh: https://amzn.to/3nT66a6
“As an Amazon Associate I earn from qualifying purchases.”
Hey, I was just working on one. I didn't know you didn't have to take the transmission all the way out anyway while I was working on mine I put everything back together and tested it was working fine and later during the day I went to start it up again and the right side wheel wasn't spinning any clue why?
Thank you wonderful video
I never see anyone grease the shaft before installing the blade adapter. They rust and is hard to remove the blade adapter. Will defenitely do it like you showed us.
I did mine the hard way.
Very simple. The easiest way so far.
How often should I replace the belt?
Great video, much appreciated.
I have the same mower
Thank you, this video saved me some money and I was able to use my tools to fix the issue on my own. Thank you very much.
genius level!
I can't get the (hub) {the device that the blade screw into) to release from the rod. I used heat, rubber hammer etc… Any suggestions?
SOLID, very efficient labor reduction .
I would put grease on that adapter. You were lucky to remove it by hand.