How to service front brakes on a 1998-2002 Honda Accord. Shows how to take the caliper off. Lube up the sliders and contact points. And how to reassemble.
How to service front brakes on a 1998-2002 Honda Accord. Shows how to take the caliper off. Lube up the sliders and contact points. And how to reassemble.
You must be logged in to post a comment.
){kind=link}
?!?!
I just change my brakes and rotor and had a shop replace calipers . But now still smoking and getting hot can anyone help
so did the it fix the squeaky sound
The very first thing I did was take the caliper off. Theres no need to disconnect it from the flex line….
Do you mean the caliper mount?
You never took the caliper off – you only removed and cleaned the caliper slide pins and changed the pads. EPIC FAIL on the video description.
oh yes sir, you’re right. i am sorry for not watching carefully.
you tell em matt
I think you have no idea what you are talking about. If you actually take the time and watch the video you will see that the slider is threaded. And it screws into the caliper itself. It is not a slider that a bolt screws into after you install the caliper. DUMBASS
sir, i think you made a mistake to install the sliders pin. the sliders pin should be installed before you install a caliper. so the tip of the sliders pin make a contact with their boot. after that you install your caliper and then install the bolts.
Thanks. I should start doing this.
Eurjeiiuishnshshdhdjshzgshehjdhshdhehgxhffjrjdjdjrndnzbddbdbdhx
:S i think in breakes it’s good idea use a toque wrench reggards
no molykote or grease on the backs of the pads or caliper/piston contact points ??
I like the noise at 30 seconds.. can we have a video of just that?
Matt, I noticed you did not sand a new service on the pad. Why not spend the extra 60 seconds and sand both pads down?