In this video we show you how to install a new fuel pump in a GMC/Chevy truck from around the year of 95. In the end we found out that this truck needed injectors too. But the old fuel pump was also bad. This video starts after we already have the fuel pump out of the truck, but we explain how we got to that point and the steps you’ll have to take to remove the fuel pump. Then we install the fuel pump on video. Thanks for watching!
1988
1989
1990
1991
1992
1993
1994
1995
1996
1997
1998
1999
2000
88
89
90
91
92
93
94
95
96
97
98
99
00
Chevrolet
Chevy
GMC
Truck
5.7
Gas tank
Fuelpump
Replace
Replacing
Replacement
Removal
Removing
Swap
Won’t start
No fuel
or you can do what i did and cut an access panel in the bed
So what do I do if I can’t get the bed off being mines a rust bucket Lmao
LMC Truck got it
Bruh I wanted to see the finish product on that sbc 350 engine running in the car it was going in. What happen to the update
I would disagree with the hose clamp comment towards the beginning. If you have a leak, sure it leaks back into the tank, but you're losing fuel pressure up front because of it. Probably fine since the new hose is always tight as hell, but figured I'd mention this for anyone else
So, did you ever figure why it wouldn’t start after you replaced everything?
I know this comment is a year late but I have a 1994 GMC Sierra with fuel problems, I’m still not sure if it’s the fuel pump or the fuel filter. Can I get an opinion?
How did y’all end up starting it? My truck is doing the same thing
Chevy truck not want start fuel pump not goed instal hos insait not good connect wed pump electric im mecanic
excellent video. definitley use clamps on hose. if fuel leaks back it can cause excessive cranking or the need to turn key to on for a few until the line pressurizes.
Great video thank you
Very helpful. Thanks!!!!!!!
"So today we're working on a 92 Chevy" "95" "is it a 95?"