How to Replace Drivers Exhaust Exhaust Manifold 96-99 GMC K1500

How to Replace Drivers Exhaust Exhaust Manifold 96-99 GMC K1500

Buy Now!
New Exhaust Manifold & Gasket Kit from 1AAuto.com http://1aau.to/ia/DMEEM00032

1A Auto shows you how to repair, install, fix, change or replace a cracked, leaking, or warped engine exhaust manifold. This video is applicable to the 97 GMC Sierra K1500

🔧 List of tools used:
• 14mm Wrench http://1aau.to/ojz/1AXAA00010
• 15mm Wrench http://1aau.to/ojz/1AXAA00010
• 14mm Socket http://1aau.to/oLM/1AXAA00015
• 15mm Socket http://1aau.to/oLM/1AXAA00015
• Needle nose pliers http://1aau.to/ohv/1AXAA00051
• Needle nose pliers http://1aau.to/ohv/1AXAA00052
• Ratchet http://1aau.to/oWB/1AXAA00016
• Socket Extensions http://1aau.to/oLM/1AXAA00015
• Gloves http://1aau.to/ocB/1AXSS00048
• Rust Penetrant
• Safety Glasses http://1aau.to/oY/1AXAA00343
• Reciprocating Saw

For More Info visit us at http://1aau.to/h/aD4/

⚠ DISCLAIMER:
While 1A Auto strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. 1A Auto is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.

49,963
Like
Save


Comments

1A Auto: Repair Tips & Secrets Only Mechanics Know says:

Watch the Video
Buy The Part at 1A Auto http://1aau.to/m/Visit-1AAuto
Do it Yourself
Save Money

Kay Bowers says:

does a bad manifold cause a constant engine tick

Jeff Roberts says:

Does the surface of the block where the old gasket was need to be cleaned up? I did not notice this in the video and my dad mentioned it while we were taking the old gasket off. I am waiting for parts to come in now.

maggot drum says:

3:27 got my nut cracker on there but i still cant get the nut to turn caz his teeth are made of wood

PL Mechanik says:

How much do you tighten the exhaust flange nuts?

Oglala Mikmaq says:

Do you sell the bolt the six bolts that bolt the manifold to the engine? I can’t find the right size

Samuel Bowers says:

I use a propane torch to heat those 3 bolts at the connector. Heating them until they glow red makes getting them off a lot easier. Just be careful where you point the torch.

Thickok 45 says:

What are the springs for?

Joe Cuevas says:

Is it possible to install the doughnut gasket the wrong way? Mines extremely loud with a huge exhuast leak. Everything was put back correctly so I'm thinking I installed the doughnut backwards? Does this matter

Garrett Garcia says:

I have talked with a old school mechanic about removing the exhaust manifold bolts.. He informed me at least one bolt is gunna break.. I see in this video an the other side yall have done an looks like yall apply little to no pressure an bam they come out… Explain to me what presses yall went through… For example wire brushed the bolt heads two day in advance an hit them with penetrate oil ect.. Thanks for your time

JACKSONVILLE says:

How many exhaust manifolds do that truck has 2or1

Comments are disabled for this post.