http://www.gofasthavefun.ca Light up the way! In this video I show you how to install a High Beam Headlight Relay upgrade kit, to make your GM truck give off…
http://www.gofasthavefun.ca Light up the way! In this video I show you how to install a High Beam Headlight Relay upgrade kit, to make your GM truck give off…
You must be logged in to post a comment.
you don’t need to do this at all to get high beams and low beams to be on
at the same time, all you need is a diode. total cost $0.02
all you need to do is pull the fuse for the high beam and the low beam and
put the diode going from the 85 slot on high fuse going in to the 85 slot
on the low beam. put your fuse back in and away you go. you can also set up
full time daytime runners, fogs on high and fogs always on. if anybody
would like just send me a pm and i can send you a diagram. total cost for
highs, lows, drl and fogs to be all on with high beams cost me $0.08
Thanks for posting. The wiring looks factory, good job.
on 94 and down trucks all you need is this GM Hi Beam Headlight
Modification | GM Steering Column | Safety | Headlights |
We’ll this work on my 1996 Tahoe and how do I buy this because I can’t find
on the lmc web
Does this work on gmt400 series trucks? I have a 1992 silverado 2500 I
installed hids for the low beam but I want to do the high beam soon but my
lows can’t shut off because when the hids cool I can’t see anything until
they warm up
does this work with a 2001 chevy silverado?
so would you need to buy 2 of these kits? one for each side?
What about the fogs will they stay on when you turn on the hi beams
do you need a relay per healight/side?
Pretty sure it’ll work. Basically all that happens is when you switch to
high beam the other light loses power. So all this does is, it keeps
feeding power to that line.
Is it enough to wire only on one headlight or do I have to do this on both
headlights of the car?
can I ask where you got the harness ffrom?
Done made my own kit took me about an hour to make the kit and another one
to install. all the stuff cost me about 8$. Thank you Anthony for teaching
me this trick you made romanian roads brighter 😀
how many Amp fuse is in it?
OK I will change the ground location I will let yet you know Thanks
how are blue turn signals legal
Yup, it would be the same idea.
How do the lights operate if you unplug the relay?
Can you tell me exactly what kind of relay to use? I’ll try to make my own
kit if i can find the right relay.
how about getting the fogs to come on too with the high beams? Any way to
rig that up or get another relay set up? Other than using the diodes trick?
thanks
Do u use 1 relay for both headlight? Or 2 relays?
Unless you modify how they are wired, factory fogs typically shut off when
the high beam circuit is activated.
hey can i do this with a cuttlas 94? its almost the same system
hi.. i have similar problem for a different vehicle make… may i have a
copy of diagram? i plan to use relay and fuse instead of kit.. thanks
alvincochua@gmail.com
So I made my own . I have experience in this so I Had no problem. But I
don’t get how to hook it up. When I turn on the high beams. The low beam
shuts off and both wires going to the low beam are positive. Not sure how
to hook up or why it is like this
They work perfectly tried on my way to work do you think I a bad relay
would any headlight relay work
LMC Truck
I have switch back LED bulbs, so when I signal they turn amber. Check my
channel you can watch the video on it.
do you ever work on police cars ? you should do some police car vids
good video, this sums it up quick and easy, I have a 2001 gmc sierra with
hids in both low and high,,your vid will help me set it up quick and
easy… keep up the good work
You could do it with a standard 5 pin Bosch relay if you wanted to.
No, haven’t had the opportunity to work on them. If I did though, I don’t
think I’d be allowed to film any of the gear.
I tried with my own relay and it won’t work
One relay will do both sides.
Yup