Limited Time: Get $10 Off Your Order
https://1aau.to/m/YT-Email-10dollars-Off
Buy Now!
New Intake Manifold with Integrated Gaskets from 1AAuto.com http://1aau.to/ia/1AEIM00032
In the video, 1A Auto shows how to remove, replace and install an old, rusted, corroded or leaking upper intake manifold. The video is applicable to the 97, 98, 99, 00, 01, 02, 03, 04, 05, 06 Ford F150 with the 4.6L V8 engine
🔧 List of tools used:
• Flat Blade Screwdriver http://1aau.to/tWP/1AXAA00013
• Pry Bar http://1aau.to/taU/1AXAA00020
• 19mm Wrench http://1aau.to/tgc/1AXAA00010
• 10mm Socket http://1aau.to/ttB/1AXAA00017
• 11mm Socket http://1aau.to/tBx/1AXAA00015
• 8mm Socket http://1aau.to/ttB/1AXAA00017
• Adjustable Wrench
• Needle nose pliers http://1aau.to/tcU/1AXAA00051
• Needle nose pliers http://1aau.to/tcU/1AXAA00052
• 1/2 Inch Ratchet http://1aau.to/tgX/1AXAA00043
• Ratchet http://1aau.to/twU/1AXAA00016
• Socket Extensions http://1aau.to/tBx/1AXAA00015
• Torque Wrench http://1aau.to/tfs/1AXAA00044
• Anti-Freeze
• Anti-Seize Grease
• Engine Oil
• Gloves http://1aau.to/taA/1AXSS00048
• Painter’s Tape
• Paper Towels http://1aau.to/tfi/1AXSS00035
• Rubber Vacuum Hose
• Safety Glasses http://1aau.to/ta/1AXAA00343
• Drain Pan http://1aau.to/tbs/1AXAA00320
• Pick http://1aau.to/tbr/1AXAA00037
• Razor Blade / Gasket Scraper http://1aau.to/tQ/1AXAA00280
• Rubber Mallet http://1aau.to/tC/1AXAA00413
For More Info visit us at http://1aau.to/h/6e/
Hey friends! Do you love helping others as much as you love DIY? We are on a mission to make our content even more accessible! Follow the link below to assist us in translating this video, and others, into a language that you are fluent in. Help us share the love of DIY!
http://www.youtube.com/timedtext_cs_panel?c=UCVvE8kQTuZEykvMFZBVzftg&tab=2
⚠ DISCLAIMER:
While 1A Auto strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. 1A Auto is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.
Great video… very informative. However, I do not recall any mention as to how the new gaskets are installed. It almost looks like you forgot to install them. Were they on the underside of the new manifold?
Thank you Sir.
Wasnt the job I need done but I love to watch you videos so I educate myself. Thanks for the upload.
I'm guessing you have to do all this just to replace valve cover gaskets
I have a 98 f150 4.6 2wd. The work is a little more aggravating as he says without the body lift. I left the egr tube hooked to the egr valve. It is true as well to remove the alternator too gives you the room to pull out the intake. Make sure to clean everything. The reason I changed mine is the same misfire issue. The gasket will crack and let coolant leak onto the plugs. In my case it leaked onto number 4. I should’ve replaced my plugs while the intake was off but didn’t highly recommend that you do the plugs while you’re in there.
I need to do this to my truck, 2003 f150 4.6 I have coolant leaking into the spark plug well
GRACIAS TRABAJO PERFECTO
Why not remove the upper and lower at the same time
Will work on the 5.4 as well correct?
I have no spark plug wires just coils why is that
Thank you for this video. It saved me some money and gave me an excuse to buy new tools!
Is this the same process for the 5.4?
I have a real powerful magnet I would put on the side of the extension that would hole the bolt in the socket. We have a leak coming from somewhere up there. Seems to be coming out of the rear manifold area. Is there a water passage back there that could fail? I'm wondering if a heater hose fitting gave out. We lost one of those a few months ago. Was a huge pain to swap. There are several others, same age. Almost 23 years old. Truck runs strong.
I love 1A auto repair videos, main reason I buy my parts from them so they have a reason to keep making them
My 02 expedition starts right up but slowly bogs and dies parked and while driving, but only when it's cold outside. Any knowledge on that?
can i assembly the other part (the black plastic botton forgot the name) outside with the top side and bringit in to the engine as a whole assembly on just one part???
Best one on youtube
great video! congratulations!!!!!.
My 2006 4.6 triton seems to be different . Coil over plugs
wow… excellent video. maybe the best i've ever seen for a mechanical instruction video.
Great job guys
Do you have any videos of the upper intake manifold removal for 1997 Ford Explorer? There's a line on the driver's side front of the upper intake that has a clip you pull out and I like to know what it goes to. I hear a leak from between the upper intake and lower and when I pull up on that line it gets quite and my trans shifts late.
Great video really helpful