Car Fix DIY Videos

Buy Now!
New Steering Rack & Pinion Bellow from 1AAuto.com http://1aau.to/ic/1ASMX00426

This video shows you how to install a new steering rack bellows boot on your 1998-2011 Ford Ranger. The steering rack bellow is a plastic or rubber cover used to protect the joint between the steering rack and the tie rods from dirt, debris, water, and other contaminants that could corrode or damage the tie rod joint.

This repair was done on a 2011 Ford Ranger XLT 2.3L Extended Cab Pickup 4-Door RWD Automatic and the process should be similar on the following vehicles:
1998 Ford Ranger
1999 Ford Ranger
2000 Ford Ranger
2001 Ford Ranger
2002 Ford Ranger
2003 Ford Ranger
2004 Ford Ranger
2005 Ford Ranger
2006 Ford Ranger
2007 Ford Ranger
2008 Ford Ranger
2009 Ford Ranger
2010 Ford Ranger
2011 Ford Ranger

Tools you will need:
• Pry Bar http://1aau.to/o6U/1AXAA00020
• 21mm wrench
• 19mm Socket
• 21mm Socket
• Wire Cutters
• 1/2 Inch Ratchet
• 1/4 Inch Ratchet http://1aau.to/obCj/1AXAA00017
• 3/8 Inch Drive Ratchet http://1aau.to/obZR/1AXAA00015
• Torque Wrench http://1aau.to/oa6R/1AXAA00044
• Gloves http://1aau.to/oaUS/1AXSS00048
• Safety Glasses
• Floor Jack http://1aau.to/oatE/1AXAA00068
• Jack Stands http://1aau.to/oafH/1AXAA00065
• Wheel Chocks

Subscribe: https://www.youtube.com/channel/UCWCdsftsTqYMO7cA_5Sc-yA?sub_confirmation=1

⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.