Car Fix DIY Videos

Buy Now!
New Sway Bar Link from 1AAuto.com http://1aau.to/ia/1ASSL00623

This video shows you how to install a front sway bar link on your 1993-1997 Ford Ranger. Sway bar links connect the sway bar (stabilizer bar) to other suspension components. They have a movable joint that can be damaged or wear out over time. When that happens, the joints get loose, and rattle.

This process should be similar on the following vehicles:
1993 Ford Ranger
1994 Ford Ranger
1995 Ford Ranger
1996 Ford Ranger
1997 Ford Ranger

Tools you will need:
• Pry Bar http://1aau.to/oa/1AXAA00020
• 18mm Wrench
• 18mm Socket http://1aau.to/oa/1AXAA00043
• 19mm Socket http://1aau.to/oa/1AXAA00043
• Pliers
• Socket Extensions http://1aau.to/oa/1AXAA00015
• Torque Wrench http://1aau.to/oa/1AXAA00044
• Anti-Seize Grease

Subscribe: https://www.youtube.com/channel/UCWCdsftsTqYMO7cA_5Sc-yA?sub_confirmation=1

⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.