How to Replace Front Hub Bearing and Knuckle Assembly 05-12 Ford Escape

How to Replace Front Hub Bearing and Knuckle Assembly 05-12 Ford Escape

Buy Now!
New Complete Wheel Hub Bearing & Steering Knuckle Assembly from

1A Auto shows you how to repair, install, fix, change or replace a worn out, vibrating or groaning wheel bearing hub and steering knuckle assembly. This video is applicable to 01, 02, 03, 04, 05, 06, 07, 08, 09, 10, 11, 12 Ford Escape

🔧 List of tools used:
• Flat Blade Screwdriver
• Pry Bar
• 10mm Socket
• 18mm Socket
• 19mm Socket
• 8mm Socket
• Ball Joint Press
• Brake Caliper Compressor Tool. Single Piston. Screw Style.
• Brake Caliper Hanger
• Pickle Fork
• Channel-Lock Pliers
• Side Cutters
• Snap Ring Pliers
• 1-1/2 Inch Socket
• 1/2 Inch Breaker Bar
• Ratchet
• Torque Wrench
• Brake Parts Cleaner
• Bungee Cord
• Cloth Rags
• Rust Penetrant
• Sandpaper
• 7mm Allen Wrench
• Center Punch
• File
• Floor Jack
• Hammer
• Jack Stands
• Pick
• Wire Brush

For More Info visit us at

While 1A Auto strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. 1A Auto is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.



1A Auto: Repair Tips & Secrets Only Mechanics Know says:

Watch the Video
Buy The Part at 1A Auto
Do it Yourself
Save Money

mufuliramark says:

Good job…… but we did see you leave a fingerprint of grease on the first brake pad

K J says:

I just did this with the same part using this video guide. After install about 3 minutes into test drive all abs and traction control lights came on. Any ideas?

Brett Vanliew says:


Eternity says:

Very cool man thanks for this video

Chris Bennett says:

Why is there not a 2014 on your website for sale?

Bryan Aker says:

What a junk front end.

Comments are disabled for this post.