How to Replace Front Brakes 05-12 Ford Escape

How to Replace Front Brakes 05-12 Ford Escape

Buy Now!
New Brake Kit from

1A Auto shows you how to repair, install, fix, change or replace your own worn, squeaky, fading old brakes. This video is applicable to 05, 06, 07, 08, 09, 10, 11, 12 Ford Escape

🔧 List of tools used:
• Flat Blade Screwdriver
• 18mm Socket
• 19mm Socket
• Side Cutters
• 1/2 Inch Breaker Bar
• Ratchet
• Socket Extensions
• Bungee Cord
• Rust Penetrant
• 7mm Allen Wrench
• Floor Jack
• Hammer
• Jack Stands
• Large C-Clamp
• Wire Brush

For More Info visit us at

While 1A Auto strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. 1A Auto is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.



1A Auto: Repair Tips & Secrets Only Mechanics Know says:

Watch the Video
Buy The Part at 1A Auto
Do it Yourself
Save Money

michael horton says:

2011 has 2 sizes of rotores ??????

Iowa&theother49 says:

my abs brakes wont shut off. do you know why???

Aaron Austrie says:

This is a well favored demonstration

L Reyna says:

If I'm bleeding the brakes on a 2005 Ford Escape Hybrid is it absolutely necessary to buy a fancy scanner? Can I just bleed them like a regular car??

MySharnita says:

I always remove the brake fluid cap before compressing the caliper back in. Enjoyed the video though. Have a blessed day!

paul longley says:

that rotar is for the drivers side

Landon P Wilcox says:

08 needs a 9mm Allen wrench

Critical Content Creation says:

How are these only $100 for a complete front set drilled/slotted and ceramic pads when it’s like $60 for just one front rotor at Autozone?

kuprebou57 says:

On the '06 the caliper bolts are removed with a T45 Torx socket..not allen head. At least on the rear calipers.

Richard Sudz says:

Is there a way to know if you have steel or phenolic pistons before you take them apart?

bryann489 says:

Best kit ever really good quality for the price!

Gary Martin says:

I always add a little grease to the bracket so the pads slide

Comments are disabled for this post.