Shows how to install a pair of 6×8’s in a 2000 ford ranger. Sorry about the last part of the video cut out idk what happened. nothing important was left out …
Ford Ranger: Installing Door Speakers
71
Like
Save
){kind=link}
Comments
Write a comment
You must be logged in to post a comment.
very helpful since i m wantin to do the same with my ranger
Thanks man. I really needed. To know how to get that window crank off.
tx for info i never even thought about removing the other harness cool
You where probly late for work wasn’t ya? thanks for the vid tho, helped me
out with my ford escape
Do the back speakers
THANK YOU SOOO MUCH I MADE A VIDEO ON MY CHANNEL REPLACING MINE BECAUSE OF
YOUR HELP =D
I did research and watched a couple cause I bought new speakers for my
ranger cause stock are stupid and I easily blew them so I bought new and
bigger ones and I just wanted to be sure about my door panels I have done
lots of friends cars just not atruck I always save mine to last as my hobby
really and ur video was more helpful than any other videos had to do some
cutting to fit mine in but I worked with it got lots of stairs hot pink
haired chick fixing up her truck lol
like i said to XxbaKKagainxX , it just depends on how the holes are on the
speaker. but you can always drill the holes wider apart
Thanks ma it help me out alot!
Thank you so much for the video- helps a lot! I don’t have the wires you
used to connect the harness and the speaker- I bought the Kicker KS68’s as
well, so I can I just buy any kind/brand of connectors or do they have to
be specific?
You’re a very helpful guy. Thanks. Just a couple of things……you
definitely need someone else holding the camera and also do these things
when you’re not pressed for time. Other than that, excellent.
Not real sure of the model of the speakers, but i want to put the 6x9s into
my 1999 ranger.
and if u could make a another video of actual visual of u wiring to the
factory harn cause all u can see is ur hands
glad to help a fellow ranger enthusiast
yes they are so much better and have a relatively clear sound
Nothing is impossible, but to fit a different sized/shaped speaker into
that will force you into custom cutting the door, and potentially the panel
too. It’s best to get a matching size (in this case, Fords/Mazdas are 6x8s)
so it both physically fits and the screw holes line up.
wish I thought of that before cutting the adapter off. now im stuck with a
super short wire running into the dark depths of the truck. I also learned
that for this truck and mazda b series( their the same thing basicly)…the
wire adapters only cost about 8 bucks plus shipping for 1 pair, for 20
bucks for the adapters instead of ruining the stock speakers, if you havent
already.
not a problem sir. my pleasure.
I just bought those same speakers and a pair of ks680, how do they sound?
Very loud even without amp?
thanks. i dont have a lot of friends to do that for me so its hard to at
times haha
We really need to go to all metric in the USA to stop with the confusion
thanks man anytime glad i could help ya
thanks a lot! i appreciate it!
thanks a lot man, i just saved myself tons of money.
is the stock harness there or no wiring at all
no the harness is the stock OEM out of factory one that comes with the truck
Yeaaa, my dad put one in, and it fit perfectly without any problems.
Thankyou anyway!
Great Job Bro! You kept it real,no arrogance or know it all crap…but just
like most peeps would do it. I’d just like to add if I may that Crutchfield
(online) has specific connectors for each make and model of auto or
truck,with complete instructions included,so all you have to do is hook’em
up. Good job man.
thanks for the help i just needed to know how to take the door off i have
replace speakers in a few truck but thay where older modles and had no
problem taking the dore off i didnt know how many screws where in it so. i
just left it alone. till i found this out. now i just need to get new
speakers cause one of mine is blown. but it was realy helpfull thank you.
not a problem man. its my pleasure to help a fellow ranger lover!
If I try to put a 6.5″ Kenwood KFC speaker there, will it work? It’s
circular
Very helpful! thank you really helped
@Doof3rproductions if theyre ocal they should work fine. and @malewizard
yeah i knew they did but i did that method so that if people didnt want to
spend the extra cash you know? but i appreciate the feedback. Thanks guys.
Like I said, nothing’s impossible. Good to know though!
thanks especially for the info on the terminal adapter thingy . got mine
changed today for my ’95 ranger that’ll never die
Good job man! Yeah my 98 ranger speakers suck
do you think a pair of pioneer 6×9’s would fit?
ummmm it depends on what year because the holes are factory but you can
drill your own for a modified whatd you have in mind bro