How to Replace Rear Shocks Dodge RAM 1500

How to Replace Rear Shocks Dodge RAM 1500

Buy Now!
New Shock Absorber Set from

In the video, 1A Auto shows how to remove and replace blown out, worn, clunking, bouncing, or weak rear shock absorbers. The video is applicable to the 94, 95, 96, 97, 98, 99, 00, 01, 02, Dodge Ram.

🔧 List of tools used:
• Pry Bar
• 19mm Wrench
• 19mm Socket
• 21mm Socket
• Locking Pliers
• Pliers
• 1/2 Inch Breaker Bar
• Ratchet
• Socket Extensions
• Torque Wrench
• Rust Penetrant
• Floor Jack
• Jack Stands
• Wire Brush

For More Info visit us at

While 1A Auto strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. 1A Auto is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.



1A Auto: Repair Tips & Secrets Only Mechanics Know says:

Watch the Video
Buy The Part at 1A Auto
Do it Yourself
Save Money

mindseeker says:

Where can i get a grille like that for my 2001 ram 1500?

Blade Runner says:

why put the visegrips on the nut when it has a leg welded to it that will bottom out on the frame/floorpan when the head of the bolt it turned? the purpose of that special nut is to make it unnecessary to hold it at all.

Comments are disabled for this post.