How to Replace Front Upper Ball Joint 2011-2018 Dodge Ram 1500

How to Replace Front Upper Ball Joint 2011-2018 Dodge Ram 1500

Buy Now!
New Ball Joint from 1AAuto.com http://1aau.to/ia/1ASBJ00262

This video shows you how to install new, quality TRQ ball joints on your 2011-2018 Dodge Ram 1500. Car and truck suspensions combine a number of moving parts for safe and stable handling. The ball joint is the crucial moving component that ties those parts together. The ball-in-socket joint can wear out and loosen over time. Or, the rubber protective boot can tear, allowing contaminants to seize the joint. Bad ball joints are a common failure point on vehicle inspections because they lead to unsafe driving conditions. Fortunately, they are relatively easy to replace with the right know-how.

This process should be similar on the following vehicles:
2011 Ram 1500
2012 Ram 1500
2013 Ram 1500
2014 Ram 1500
2015 Ram 1500
2016 Ram 1500
2017 Ram 1500
2018 Ram 1500

Tools you will need:
• Flat Blade Screwdriver http://1aau.to/oasj/1AXAA00013
• Pry Bar http://1aau.to/oi8/1AXAA00020
• 19mm Wrench http://1aau.to/orv/1AXAA00010
• 10mm Socket http://1aau.to/o4J/1AXAA00017
• 18mm Socket http://1aau.to/ouc/1AXAA00043
• 19mm Socket http://1aau.to/ouc/1AXAA00043
• 21mm Socket http://1aau.to/ouc/1AXAA00043
• 22mm Socket http://1aau.to/ocS/1AXAA00266
• Ball Joint Press
• Wire Cutters
• Ratchet http://1aau.to/oaue/1AXAA00016
• Torque Wrench http://1aau.to/oyv/1AXAA00044
• Bungee Cord
• Chisel http://1aau.to/odc/1AXAA00055
• Floor Jack http://1aau.to/owK/1AXAA00068
• Hammer http://1aau.to/on7/1AXAA00091
• Jack Stands http://1aau.to/owT/1AXAA00065

Subscribe: https://www.youtube.com/channel/UCWCdsftsTqYMO7cA_5Sc-yA?sub_confirmation=1

⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.

388
Like
Save


Comments

TRQ says:

√ Watch the Video
√ Buy The Part at 1A Auto http://1aau.to/m/Shop-TRQ-Parts
√ Do it Yourself
√ Save Money

Mike Wall says:

Can you press out ball joints on stock upper control arms?

Comments are disabled for this post.