How to Replace Front Brakes 2006-10 Dodge Charger

How to Replace Front Brakes 2006-10 Dodge Charger

Buy Now!
New Brake Pad & Rotor Kit from 1AAuto.com http://1aau.to/ia/1APBS00483

Brake pads wear out over time, much like tires, and need replacing, on average, every 50,000 miles, with variations depending on driving habits and environment. Brake rotors may also need to be replaced if they are warped or grooved. Often, it’s safer and more cost effective to replace pads and rotors at the same time. Squealing or grinding noises, or wheel vibration are all symptoms of worn brakes. This video shows you how to install new, quality TRQ brake pads and rotors on your 2006-10 Dodge Charger.

• Check here for more videos on the 2006-10 Dodge Charger: https://www.youtube.com/playlist?list=PLJVpHWuCEUX-c73IBzhi5xzeJEd1S3yt9

⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.

13,995
Like
Save


Comments

TRQ says:

Watch the Video
Buy The Part at 1A Auto http://1aau.to/m/Shop-TRQ-Parts
Do it Yourself
Save Money

Key says:

Yasss TRQ you do a good job at explaining I enjoy watching you instruct. 1A auto

Darryl Carpenter says:

Thanks very much. Great vid and explained well.

Johnny J says:

What's the spray you use?

fasteddierocs says:

Awesome thanks !

ron martin says:

I checked this video b4 telling a friend I would their brakes.
Only info I needed was whether a special tool was required to compress the caliper cylinder.
you never mentioned having to compress it for folks goin from no pad to new pads.
Also would be good to show people how to recognize a siezed caliper…

Close Enough Productions says:

0:23 made me laugh so hard! Although sadly, that's what I think my brakes look like now after sitting for months during lockdown

WoWlover712 says:

Very fast and detailed at the same time and thank you so much for the note about the proper torque for the police edition!

Comments are disabled for this post.