http://www.1aauto.com/1A/HeadLights/Dodge/Neon/1ALHP00386 1A Auto shows you how to repair, install, fix, change or replace the broken, damaged, cracked, fade…
http://www.1aauto.com/1A/HeadLights/Dodge/Neon/1ALHP00386 1A Auto shows you how to repair, install, fix, change or replace the broken, damaged, cracked, fade…
You must be logged in to post a comment.
On a 2005 you can reach the passenger light without loosening the grill. In my experience there is no way to reach the drivers light without doing so and I was stuck until I watched your video. Thank you.
Do you have an auto repair video that shows this particular repair. 1aauto.com 888-844-3393
DO you have a video for the 1998 Dodge Neoen headlight and tail light replacements?
The earlier models may attach differently.
would this be similar to a 95-99 neon?
We curently do not have an auto repair video that shows this particular repair.
How do I replace the fog light assembly on a 2002 Neon? After taking out all obvious screws, I still can’t get the bumper off.
yes it does, thanks you!!!
Yes you would remove the driverside headlight in the same way as the passenger side on your 03-05 Plymouth or Dodge Neon. Hope this helps you out. Have a great day! 1aauto.com 888-844-3393
the same way you remove the headlight assembly, is this done the same way on the driver’s side? i found it difficult to remove the driver side headlight for some reason…just curious….
yes please
Thanks for the video!! Super helpful!
We currently do not have an auto repair video of that particular repair. We’ll keep this request in mind in the event that we need to make this repair in the future.
YOU ARE AMAZING!!! THANK YOU SO MUCH AND REALLY GOD BLESS YOU!!!
I’m sorry to bother you but , do You know (of course You know) how to replace the whole bumper in a same 2003 dodge neon, Do you have a video about it…Thanks again…Have a nice day
YOU ARE AMAZING!!! THANK YOU SO MUCH AND REALLY GOD BLESS YOU!!!
Thank you! Helped so much!
Thanks for watching. 1aauto.com 888-844-3393
Hats off to your dedicated channel guys great videos!
We currently do not have an auto repair video on this patricular year/make/model. if you have a Haynes manual it should show you how to service the bolt.
How do you replace just the headlight? The bulb snaps into it, but it’s not obvious how the black plastic ring attaches to the headlight assembly. It’s not a natural fit, so the light is just sort of situated – kept from falling by the connecting wire.
I’m on a 98.
If the tabs on the headlight are fine (depending on how it snapped) you may be able to drill the broken bolt out and put a new one in. Hope this helps you out.
So, I was trying to replace a burnt bulb on the drivers side and the bolt nearest to the front snapped off a few turns in. Any suggestions?
Cool
You may want to have a reputable auto body shop take a look at if for you, to see how extensive the damage is. There may be a few things that they will want to straighten out for you, so that you can properly secure the headlight back into place. Hope this helps you out.
So my car was hit right on the headlights during a hit and run, so the cover is broken as well as damage to the body around the headlight. I’ve taped over it as a temporary measure. When there is damage to the body as well, does that complicate things and make it harder to fix? Should I just bring it in to someone instead of attempting to do this myself? I should note that this would be my first time trying something on the car. Thanks!!
You should be able to twist the bulb and just pull it right out of the lens.
thanks, appreciate it
If you could get some penetrating oil on them it wouldn’t hurt.
BAH! such a chore. My driver side light just went out… #$%^!!!!!!!! great vid thanks! My bolts snapped off too! would you recommend hitting them with some Wd40? to lub up the bolts? thanks
Thanks!
Awesome thanks for the vid,I changed the driver side headlight,went to gas station throttle got stuck almost died…pretty awesome tps woot
If you snapped the heads of the bolts the assembly should lift right out. If the bolt studs are still in the holes, you would need to drill them out in order to be able to bolt the light back in place.
We’ll keep this in mind, if we have another Neon that comes in and needs to have something repaired under the front bumper cover. Have a great day.
Can you make a video on how to replace the front bumper on this car.. Thank you greate video.
should have done the driver side. It is 10x more harder. I tried today and all the bolts snapped, How would you change the bulb if the light doesn;t come out?
thank you very informative vid
This is awesome, thank you for this.
Thank you. I was beginning to think I’d have to loosen the facia and was loath to do so! Headlight installed!
It glitched because I pulled hard and the light shot right out. So I re-shot it pulling it smoothly and not dropping it 🙂
Thanks for posting this. Helped me out. Really have to bend the body to get that damn light out. What a pain… 😉
Great video, thx
thanks you… this video was very helpful
thank yo very nice video im installing some HALOS
how come the video glitched when taking out the headlight?