How to change or replace a water pump, thermostat and housing, radiator hoses and full engine flush on a Dodge Dakota , Jeep liberty, Dodge Ram , Mitsubishi Raider, and anything that runs a 3.7 or 4.7 engine. From 2005-2011
Tools used:
90 degree Needle nose pliers: http://amzn.to/2ByCLr8
assorted sockets
Vise Grips large: http://amzn.to/2Gnxy4D
Pulley pump wrench: http://amzn.to/2BAJ5hO
Gasket maker: http://amzn.to/2Hni2qS
Antiseeze: http://amzn.to/2Crqhyx
Parts Used:
Water pump: http://amzn.to/2GpsX21
180 degree Thermostat: http://amzn.to/2FbNoAd
Thermostat housing:http://amzn.to/2EDOk3e
Heater hoses lower and upper: http://amzn.to/2HsnrwP
This video helped me a lot
Exactly the video I needed. The fan was a pain to get off without the fan wrench since I didn't have stock to make my own.
For anyone else make sure you're turning the large nut CCW for removal (for the fan/clutch assembly). The four smaller bolts only need to come off if you need to replace the fan clutch.
Thanks again for the help, keep making videos.
I'm still not understanding how to get the fan off the water pump