Instagram^^^^@The_Gas_Tap
FaceBook^^^^The Gas Tap
Small vid on installing the window regulator that’s going to eventually break on every Dakota and Durango.
Instagram^^^^@The_Gas_Tap
FaceBook^^^^The Gas Tap
Small vid on installing the window regulator that’s going to eventually break on every Dakota and Durango.
You must be logged in to post a comment.
')){kind=link}
Good video, you may want to add an annotation about not cracking the glass by tightening the bolts that hold it in the regulator too much
what if you can't get the window down?
question…i have an 04 dakota club cab. i live where it gets below freezing during the winters. one wintery day when i went to open the drivers window, the window or something was frozen and i heard a crack and the window stopped moving. i moved it around a bit and got lucky i guess and the window must have popped back into its track/(regulator?). it worked fine until it happened again a winter or two later after some more freezing temps and ice. unfortunately it didnt go back in track. finally got around to see whats going on with it and the long track was laying on the bottom of door. I also see the scissor type apparatus.( is this the regulator?) is missing one of the small little wheels that ride in the track. will i need a new assembly or are those small little wheels for sale?? the motor works fine. any opinions/help is greatly appreciated.
This is a good video simple and helpful….. Thanks for sharing
Awesome tutorial! Thanks for sharing.
I'm about to tackle this project with my son for his truck. Thanks for making this video. I never thought I would be doing something like this but you made it clear and easy to understand.
Thanks for the help with this video man! As a YouTube creator I appreciate the time you took to make it. Helped me out today! Subbed!
thank you very much for the help from this video
Awesome! That showed me all the pieces! Thanks bro!
nice video, thanks for the link.
i learned how to change a window regulator evwn though i didnt have to.. also how flipping hotttttt you are
Nice man! I've got to replace the window motor assembly on my driver side too. You defiantly made it look a lot easier than it is. This gave me a little insight of what to expect. This will be my first time changing one.
Let's say the door window glass is broken. What parts of the door do you remove to get the new pane in?
Good job Alex I get the feeling you have done this before.
A couple sets of 2 inch suction cups and some short 1 or 2 foot long bungee cords wired onto the hooks of the suction cups makes that job easier. I found the suction cups once in a dollar store that were for hanging wreaths and decorations in windows at Christmas.
Great job. You made it look a lot easier than it is. Well done.
If I had a dime for all the motor / reg. I did in my dealership days.