This video covers installing a steering box stabilizer on Pat’s 1998 2nd Gen cummins and all 1994 – 2002 Dodge 2500 4×4, as well as, a parts list and review on how to dial in your front steering and cure death wobble once and for all. Make sure to check out our other install video on red head steering boxes https://youtu.be/K7QbFBooAUo.
Sponsors : Blades Welding
: Patriot Portable Restrooms
){kind=link}
Are your wheels offset or are you using spacers?
Where can I find the kit you use
What stabilizer kit are you running on the red head box? And how is it holding up?
Just throwing my 2 cents in…I have a 98.5 24V with stock front end other than 2 inch lift and SSI adjustable track bar and never had death wobble…my 03 1 ton common rail single wheel though had it…I did 5500 upgrade steering kit….steer box….adjustable track bar…truck had a leveling kit…..wheel bearings….steering brace…all the goodies…..it ended up being tire pressure. I would run 20lbs lower than sidewall in the winter and rated psi summer. Once I figured it out I ran no less than 10 psi rear and 5 psi front from sidewall rating and never had an issue with wobble ever again.