my custom stereo in my dodge ram, i installed all myself Stuff in truck: -Alpine 6×9 in front doors SPR-69C -Alpine 5.25 in rear doors APR-13C -Rockford Fosg…
my custom stereo in my dodge ram, i installed all myself Stuff in truck: -Alpine 6×9 in front doors SPR-69C -Alpine 5.25 in rear doors APR-13C -Rockford Fosg…
You must be logged in to post a comment.
i bought everything on ebay
where do you get that adaper from
hey was is that thing called so u can connect ur aux cables to ur factory
radio? i have an 06 dodge and got me a box and 2 12″ cvts now im waiting on
getting it in the mail im gonna use my p1000-1bd
Still have the stock battery? Or a yellowtop? Do you have a capacitor?
How much was that probox?……I dont see the price listed on the
website……I’ve got a 15″ L7 in a huge box taking up all my room in the
backseat. This looks alot better.
So i ordered a loaded with sub enclosure(for under the backseat) with two
10’s powered by a 400 watt amp all pre wired. Will i be able to install
this setup with out the adapter?
thats the dodge stock nav, i now have a pioneer avic-z110bt, i want to get
the new avic-z140bh
A really easy way to pass speaker wire through those rubber dust boots in
the doors is to remove the rubber boot from the pillar and tape the wires
to a coat hanger and pass them through……
@hiei114 in my part 2 of this video, i put an after market radio in, and i
put that part in ur talking about,i got mine for $80 online. without it the
cars computer trips out. bestbuy, everything is kinda a rip off, u can get
stuff cheaper online, there install r expensive 2 but they do a good job on
that
What is the name of that song?
@guide73 i couldnt figure that out either, but my but i got a small screw
driver, poped the side facing towards the front of the truck up, then
jammed something in to hold it, and poped the side towards me. it was a
pain in the ass. to get wires threw it, theres a spot in the plastic clip
that has no wires, so i drilled a hole threw it and ran the wires., and it
all fits back nice, didnt have to file the door, like i did for my back ones
You sound like xJawz.
my t1500 is at almost the lowest setting. ill put another video up sometime
soon show it a little more, ive been busy for a while… lol and i got my
t1500 for $300 on e.b.a.y new, lol
@mallow399 ya, i drilled the extra hole in my back doors, im changing the
speakers tho, cause they arent loud enough for me, especially with the sub
installed
@liljohn30 try using the blue wire (antena on) on the c2r-chy4, i saw
something about that, im not sure, but ill look at mine later
@mallow399 thats what i thought, but they have small magnets on them, and
dont sound the clearest at 300watts. changing them out soon when i get a
little more money
@PSPHaCkErAOD i have the pioneer avic-z110bt which does everything the oem
navi did and a lot more, it has a back up cam that works fine with it, the
newer model out is the avic-z130bt which is even cooler, retail is a lot
but u can pick it up for half price if u look around, just order one for a
friends car for $865
@psphackeraod Ok thanks man! I’ll start looking around!
i have an 06 ram 1500. but the dash looks exactly like yours. my auxiliary
input on the factory radio works for the front passenger side speaker. is
there a way to get going to all four?
alright thanks
what is that probox tuned at i was thinking on buying that setup and
wondering what can work in that box
@PSPHaCkErAOD alright thanks man that helped a bunch im glad i didnt buy
that i was thinking bout getting me a new head unit a full 2 dinn touch
screen do u have any recomendations i dont wanna go past 300
sorry for so many questions btw. i just wanna do this right.
@jrosas05 i think they hit pretty hard for 10’s. there not to much u can
really fit in under the seat in the ram. i hear them everyday so i got used
to them after awhile and want to try and fit something else in, but havnt
fully figured that out yet. but dont get me wrong they are good subs, for
10’s there some of the best i have heard, and they impress most people who
get in my truck
Hey man I have the same truck, same radio, but I saw on your nav screen you
could see your playlist of songs, mines just an audio mp3 layer i hook the
headphone jack to my phone and play it, is your receiver hooked up to your
ipod? and how did you do make it like that, i would love that in my truck.
@BeltwayBud there was a cool thing called the lockpick, but if u can has
been to the dealer any time from 09 or later they probably updated ur cars
computer and it wont work anymore, i had that on my stock navi. had to take
it off cause after the update i keep getting check engine, and service
airbags, and other lights. the company that makes the lockpick claims it
still work but it doesnt other then that idk of anything, y would u want to
keep the stock radio instead of aftermarket?
thank you for your help.
I’m the Ish (remix) [feat. Lil John]
@dellguy123 i purchaced my truck new, that is the stock nav radio in this
video the dash was different if u didnt have the nav radio, but they sell
that piece for $90 online if u want to have the part like mine, then u
could fit a double din radio in like i did in part 2 of this
@DynoHeat i had the lockpick which let me add an ipod, but that tripped out
the cars computer and i had the pac audio c2a-chy which gives u rca outs
for an amp, but it sound staticly and the radio does output sound if the
volume gets turned below 18 on the rec nav radio this stuff annoyed me so i
ripped this radio out and put in the avic-z110bt which i show in my other
video, its such a better radio, i show its install in another video
@Sotexy2 ill pm u what i got in my truck cause it will get deleted if i
post it here
i will try,yours works fine? would love to know how u did it
@DynoHeat i had the nav, but not for some reason the premium sound system
was removed by the dealer, so i had the same speakers u have now, they
sounded really bad, lol. one there thing tho, with the radio u have, a
double din wont fit the trim unless u cut it or get the trim for the nav
radio i think, cause my cousin has an 06 also with the stock radio and we
could only get a flipout in cause he didnt want to cut or replace the trip
@MrTonycampos i ordered it from probox they said its rms was 1000 and peak
was 2000 watts i got a rockford fosgate T1500 on it, but im giving it 1250
watts for both the subs together i made more changes to my system check
back later this week and i should have a video of my new pioneer
avic-z110bt and other stuff i put in
@ psphackeraod How much watts should my amp be? And do I need to worry
about ohm’s and all that crap?
how do i display psp displayed on computer with usb
i have the same door speakers type r front and back …had to drill another
hole for the screw tho for the back ones …did you ? the 6x9s fit like a
glove. Currently installing 2 1000 watt amps for my apline type x subs and
then next summer ill amp the door speakers.
Nice vid!! Clowns r cool. Lol
@PSPHaCkErAOR what size are the factory frondoor speaker size? My 08′ rams
factory stink n i wanna upgrade. Tell me what size speaker would fit
without any modifications.
also the one under the door handle is a 10 mm socket ..i used a nut driver.
Hey PSPHaCkErAOD – So by now, how do you like those R-series Alpines? Are
you totally happy with them? Would you buy them again if you could do it
over? Also, did you do component or coaxial? Are they holding up to the
power you’re pushing to them? I’m looking pretty hard at the component 6.5″
R-series Alpines for the front, and coaxials in the rear doors. I haven’t
decided on the amps and subs yet. Lots of questions…Thanks for the info!
@DwSummerfield yes sir