Buy Now!
New Steering Rack & Pinion Bellow from 1AAuto.com http://1aau.to/ib/1ASTB00032
This video shows you how to install a new steering rack bellows boot on your 2005-2010 Chrysler 300. The steering rack bellow is a plastic or rubber cover used to protect the joint between the steering rack and the tie rods from dirt, debris, water, and other contaminants that could corrode or damage the tie rod joint.
This process should be similar on the following vehicles:
2005 Chrysler 300
2006 Chrysler 300
2007 Chrysler 300
2008 Chrysler 300
2009 Chrysler 300
2010 Chrysler 300
Tools you will need:
• 14mm Wrench http://1aau.to/oPi/1AXAA00010
• 22mm Wrench
• 21mm Socket http://1aau.to/o6I/1AXAA00043
• Pliers
• Wire Cutters
• Ratchet http://1aau.to/obmz/1AXAA00016
• Socket Extensions http://1aau.to/obaZ/1AXAA00015
• Torque Wrench http://1aau.to/oarm/1AXAA00044
• Anti-Seize Grease
• Hammer http://1aau.to/oNB/1AXAA00091
Subscribe: https://www.youtube.com/channel/UCWCdsftsTqYMO7cA_5Sc-yA?sub_confirmation=1
⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.
√ Watch the Video
√ Buy The Part at 1A Auto http://1aau.to/m/Shop-TRQ-Parts
√ Do it Yourself
√ Save Money