https://www.1aauto.com/wheel-bearing-and-hub-assembly-front-driver-or-passenger-side/i/1ashf00369?utm_source=YouTube&utm_medium=description&utm_campaign=videodesc&utm_term=hbhqV_KTVb4
1A Auto shows you how to repair, install, fix, change or replace a worn out or screeching front hub assembly. This video is applicable to the 06 Chrysler 300
🔧 Instructions:
1. Removing the Wheel 1:09
2. Removing the Brake Pads 1:21
3. Removing the Brake Rotor 1:46
4. Removing the Hub Assembly 2:12
5. Installing the Hub Assembly 4:03
6. Preparing the New Brake Pads and Rotors 5:00
7. Installing the Brake Rotor 7:23
8. Installing the Brake Pads 8:49
9. Reattaching the Wheel 9:53
⚠ DISCLAIMER:
While 1A Auto strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. 1A Auto is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.
What brand was used in the video
Why is it always a red vehicle? Mine is AWD and the change out is different… More videos on an AWD 5.7
I have an 06 300c AWD. I need to change the bushing at bottom of strut that is pressed into the lower control arm. Can that be pressed out?
Great job I watched your video before I changed both hubs with no problems, thanks
Will this be the same on a 2015 300?
The big axle nut says one time use only on it, and it didn't come with my new bearing. Please keep this in mind if you're doing this job at home. Make sure the replacement bearing comes with the nut or make sure you buy one before you start the job.
Once again a fantastic detailed video. Thank you so much!
Another awesome video. Excellent!)
Love your working style! Definitely old school, and correct!
Are they all screw on the out parts store said mine are press on I have a 2006 regular Chrysler 300 v6 2.7
Question when these hub bearings go bad could that cause the traction control light to turn on? I have a 2007 Dodge Magnum with the 3.5v6 my car drives good but the sound is getting louder and now my traction control light turns on.
Hey this has been a very informative video thanks so much. Quick question, do these wheel hubs for the Chrysler 300 include the reluctor ring? Mine is defective, should I replace the front wheel hub.
I have an 06 Dodge Charger RT has the same hub but the Hub is stuck on the spindle any suggestions
informative video. I personally use a c-clamp to compress the caliper piston as it gives a more controlled compression.
WHATS THE WARANTY ON YOUR PARTS? ARE YOUR PARTS AS GOOD AS MOOGS?
I hope this is what's wrong with my car because there is no sound but my wheel is moving and my tire is going bald on the outside side of my tire,thanks a lot for the video