Car Fix DIY Videos

Buy Now!
New Control Arm with Ball Joint from 1AAuto.com http://1aau.to/ib/1ASLF00164

This video shows you how to install a new quality TRQ lower control arm with ball joint in your 2005-2010 Chrysler 300. Control arms are a crucial part of the suspension system of your vehicle. They not only carry the load of the vehicle to the wheel, but they typically also maintain its alignment. Control arms are typically large and strong, so you may be surprised it needs replacing. They contain rubber bushings for smoother rides at the cost of eventual wear, or integrated ball joints that require replacing the entire arm when they wear.

This process should be similar on the following vehicles:
2005 Chrysler 300
2006 Chrysler 300
2007 Chrysler 300
2008 Chrysler 300
2009 Chrysler 300
2010 Chrysler 300

Tools you will need:
• Flat Blade Screwdriver http://1aau.to/oa5C/1AXAA00013
• Pry Bar http://1aau.to/oJQ/1AXAA00020
• 21mm wrench
• 21mm Socket http://1aau.to/o4q/1AXAA00043
• Dead Blow Hammer http://1aau.to/oMp/1AXAA00091
• Torque Angle Gauge
• 1/2 Inch Impact Gun http://1aau.to/oom/1AXAA00252
• 3/8 Inch Impact Gun
• Torque Wrench http://1aau.to/oaov/1AXAA00044
• Floor Jack http://1aau.to/oRQ/1AXAA00068
• Hammer http://1aau.to/oMp/1AXAA00091
• Jack Stands http://1aau.to/oMi/1AXAA00065

Subscribe: https://www.youtube.com/channel/UCWCdsftsTqYMO7cA_5Sc-yA?sub_confirmation=1

⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.