Car Fix DIY Videos

Buy Now!
New Driveshaft Center Support Bearing from 1AAuto.com http://1aau.to/ib/1ADSH00091

This video shows you how to install a driveshaft center support bearing on your 2005-2010 Chrysler 300.

This process should be similar on the following vehicles:
2005 Chrysler 300
2006 Chrysler 300
2007 Chrysler 300
2008 Chrysler 300
2009 Chrysler 300
2010 Chrysler 300

Tools you will need:
• Pry Bar http://1aau.to/oMc/1AXAA00020
• 10mm Wrench http://1aau.to/oQa/1AXAA00010
• 18mm Wrench
• 12mm Socket http://1aau.to/obdh/1AXAA00015
• 13mm Socket http://1aau.to/obdh/1AXAA00015
• 14mm Socket http://1aau.to/obdh/1AXAA00015
• 18mm Socket http://1aau.to/o7R/1AXAA00043
• Bearing Separator
• Pliers
• T55 Torx Socket
• 1/2 Inch Ratchet http://1aau.to/o7R/1AXAA00043
• A Piece of Pipe (for leverage)
• Ratchet http://1aau.to/oboS/1AXAA00016
• Socket Extensions http://1aau.to/obdh/1AXAA00015
• Swivel
• Torque Wrench http://1aau.to/oas2/1AXAA00044
• Anti-Seize Grease
• Bearing Grease
• Bungee Cord
• Liquid Thread Locker
• Marker / Writing Utensil
• Rust Penetrant
• Hammer http://1aau.to/oPn/1AXAA00091
• Pole Jack

Subscribe: https://www.youtube.com/channel/UCWCdsftsTqYMO7cA_5Sc-yA?sub_confirmation=1

⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.