How To Replace Fuel Tank 1988-2000 Chevy C/K1500

Buy Now!
New Fuel Tank Kit from 1AAuto.com http://1aau.to/ic/1AFRK00116

A rusted, banged up, punctured, or leaking fuel tank could be bad news. If your truck needs a new fuel tank, you can install this model specific replacement tank from TRQ. This video shows you how to install a new TRQ fuel tank made specifically to fit your 1988-2000 Chevy C/K1500.

• Check here for more videos on the 1988-2002 Chevy K1500 http://www.youtube.com/playlist?list=PLJVpHWuCEUX8H3TYrfqfxS63cPmr-AhVw

This process should be similar on the following vehicles:
1988 Chevrolet K1500 Truck
1989 Chevrolet K1500 Truck
1990 Chevrolet K1500 Truck
1991 Chevrolet K1500 Truck
1992 Chevrolet K1500 Truck
1993 Chevrolet K1500 Truck
1994 Chevrolet K1500 Truck
1995 Chevrolet K1500 Truck
1996 Chevrolet K1500 Truck
1997 Chevrolet K1500 Truck
1998 Chevrolet K1500 Truck
1999 Chevrolet K1500 Truck

Tools you will need:
• Flat Blade Screwdriver http://1aau.to/oa/1AXAA00013
• 15mm Wrench http://1aau.to/oa/1AXAA00010
• 15mm Socket http://1aau.to/oa/1AXAA00015
• Air Blow Gun
• Cutoff Wheel http://1aau.to/oa/1AXAA00254
• Hose Clamp Pliers http://1aau.to/oa/1AXAA00076
• Ratchet http://1aau.to/oa/1AXAA00016
• Socket Extensions http://1aau.to/oa/1AXAA00015
• Brass Punch
• Hammer http://1aau.to/oa/1AXAA00091
• Pick http://1aau.to/oa/1AXAA00037
• Wire Brush http://1aau.to/oa/1AXAA00079

Subscribe: https://www.youtube.com/channel/UCWCdsftsTqYMO7cA_5Sc-yA?sub_confirmation=1

Check out our playlist:
Chevy K1500 Pickup 1988-2002: https://www.youtube.com/playlist?list=PLJVpHWuCEUX8H3TYrfqfxS63cPmr-AhVw

⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.

Comments

TRQ says:

March 28, 2023 at 3:27 pm

√ Watch the Video

√ Buy The Part at 1A Auto http://1aau.to/m/Shop-TRQ-Parts

√ Do it Yourself

√ Save Money

biff314 says:

March 28, 2023 at 3:41 pm

Of course the range of years was provided as those years have many similarities. What was not identified that would be helpful is the model year they are working on in this video. Early on, judging by the mirror, the truck is a 1994 model or older.

I believe that after 1997? … GM changed the fuel connections to quick connects which requires a completely different set of tools (if you want to keep from damaging the fittings) in order to disconnect the hose fittings from the tank.

Then it may be a surprise if dropping your tank using this video.

Ron Hampe says:

March 28, 2023 at 4:04 pm

If I had a lift this video would be great. I have also found from watching some of your other videos that you conveniently fast forward when installing the hard to reach parts.

Ray merck says:

March 28, 2023 at 4:18 pm

I took the bed off to get mine out I definitely advise you pop the for bolts out and take the bed off it gives a lot more room

Daniel Gatto says:

March 28, 2023 at 4:25 pm

Will this video apply to a 1999 k2500?

Montana Maxim says:

March 28, 2023 at 4:51 pm

Step one- be a man and do it your self.

Steve Carlson says:

March 28, 2023 at 5:00 pm

I never realized what an easy job this is. I just need to install a lift and buy a transmission jack. Simple!

old biker says:

March 28, 2023 at 5:20 pm

at least GM had steel lines right in to the pump , to day they use plastic lines in the tank to the pump that crack or blow off , Q C is out to lunch , never by an other pump but AC Delco or Delphi . ask me I know .