1A Auto shows you how to repair, install, fix, change or replace a slow, stuck, cracked or damaged window regulator. This video is applicable to the 12 Chevy Equinox
For More Info visit us at http://1aau.to/h/vy/
⚠ DISCLAIMER:
While 1A Auto strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. 1A Auto is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.
){kind=link}
√ Watch the Video
√ Buy The Part at 1A Auto http://1aau.to/m/Visit-1AAuto
√ Do it Yourself
√ Save Money
Very helpful video, I got everything back together, but I can’t get the pins to reclip. Tried my hand like you did and also tried a rubber mallet with no luck. Also tried closing the door pretty hard in hopes that that might work, but the bottom is still loose. Any advice?
Pro tips: tape window up. Loosen the clamps slightly before trying to attach to window. Bolt the rails in tight because that should align the clamps to the window. Attach the door panel temporarily to turn regulator on to get clamps up to the window and then tighten those. You dont want the regulator to have clamps all the way up when u install them. Make sure they are like 3/4 the way up and then turn car keys on, put window control up to mate clamps to window and then tighten. My window was stuck all the way down so i removed all the rail hardware and pulled the window up by hand.then I started from there
Great tutorial. I just did mine with your assistance!
NICE video….the manufacturers of late-model stuff like to hide things. Thanks for publishing this.
So you show taking it out but not actually replacing the regulator? Just taking it out and reinstalling the whole assembly? Lol
direct links to the parts and tools would be cool
nice video thank you
Great video, very helpful. My problem is that I need to know how to replace the regulator with the window stuck all the way down. I can’t get it to budge so as to lift it all the way up and out of the way of replacement. Any thoughts? Thanks!
Have you had any problems when you only remove the small motor if the regulator I could not put it back,seems like if is no fit?
Video link for removing and installing front door glass window for the same year and model? Thanks!
Can the motor be replaced without taking out the regulator?
Does 1A Auto carry this item?
Excellent video. Just what I needed to complete this repair on my vehicle. Is there any way you could do an instructional video on how to replace the interior door handle on this vehicle as well? It is the exact same door style/panel as the one in this video. The handle is held in place by plastic, melted rivets/fasteners and I could use some guidance on how to get it replaced the right way. Thanks for the great videos.