Car Fix DIY Videos

Buy Now!
New Brake Pad & Rotor Kit from 1AAuto.com http://1aau.to/ic/1ABFS01425

Brake pads wear out over time, much like tires, and need replacing, on average, every 50,000 miles, with variations depending on driving habits and environment. Brake rotors may also need to be replaced if they are warped or grooved. Often, it’s safer and more cost effective to replace pads and rotors at the same time. Squealing or grinding noises, or wheel vibration are all symptoms of worn brakes. This video shows you how to install new, quality TRQ brake pads and rotors on your 2000-2006 Chevy Tahoe.

• Check here for more videos on the 2000-06 Chevy Tahoe http://www.youtube.com/playlist?list=PLJVpHWuCEUX_cohS4RzBLokyFMmuLEHbG

This process should be similar on the following vehicles:
2000 Chevrolet Tahoe
2001 Chevrolet Tahoe
2002 Chevrolet Tahoe
2003 Chevrolet Tahoe
2004 Chevrolet Tahoe
2005 Chevrolet Tahoe
2006 Chevrolet Tahoe

Tools you will need:
• Flat Blade Screwdriver http://1aau.to/omn/1AXAA00013
• Pry Bar http://1aau.to/ocY/1AXAA00020
• 18mm Socket http://1aau.to/oe2/1AXAA00043
• 22mm Socket http://1aau.to/oax/1AXAA00266
• Brake Caliper Compressor Tool. Quad Piston. Ratchet Style. http://1aau.to/od/1AXAA00278
• Brake Caliper Hanger http://1aau.to/oR/1AXAA00084
• Ratchet http://1aau.to/one/1AXAA00016
• Torque Wrench http://1aau.to/og5/1AXAA00044
• Brake Grease
• Brake Parts Cleaner
• Copper Anti-Seize
• Gloves http://1aau.to/oba/1AXSS00048
• Safety Glasses http://1aau.to/oaK/1AXAA00343
• Floor Jack http://1aau.to/odq/1AXAA00068
• Hammer http://1aau.to/oc7/1AXAA00091
• Wheel Chocks

Subscribe: https://www.youtube.com/channel/UCWCdsftsTqYMO7cA_5Sc-yA?sub_confirmation=1

Check out our playlist:
Chevy Tahoe 2000-06 2nd Generation: https://www.youtube.com/playlist?list=PLJVpHWuCEUX_cohS4RzBLokyFMmuLEHbG

⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.