Buy Now!
New Brake Kit from 1AAuto.com http://1aau.to/ia/1APBS00302
1A Auto shows you how to repair, install, fix, change or replace your own worn, squeaky, fading old brakes. This video is applicable to 07, 08, 09, 10, 11, 12, 13, 14, 15, 16, 17, 18 Chevy Silverado
🔧 List of tools used:
• Flat Blade Screwdriver http://1aau.to/oajS/1AXAA00013
• Pry Bar http://1aau.to/ohD/1AXAA00020
• 18mm Socket http://1aau.to/orW/1AXAA00043
• 19mm Socket http://1aau.to/orW/1AXAA00043
• 21mm Socket http://1aau.to/orW/1AXAA00043
• Brake Caliper Compressor Tool. Single Piston. Screw Style. http://1aau.to/om/1AXAA00012
• Brake Caliper Hanger http://1aau.to/oP/1AXAA00084
• T30 Driver http://1aau.to/orX/1AXAA00008
• 1/2 Inch Breaker Bar http://1aau.to/okV/1AXAA00078
• A Piece of Pipe (for leverage)
• Ratchet http://1aau.to/oamj/1AXAA00016
• Socket Extensions http://1aau.to/o6q/1AXAA00015
• Torque Wrench http://1aau.to/ovM/1AXAA00044
• Brake Grease
• Brake Parts Cleaner
• Cloth Rags http://1aau.to/ohG/1AXSS00035
• Center Punch http://1aau.to/ocE/1AXAA00055
• Hammer http://1aau.to/omj/1AXAA00091
• Wire Brush http://1aau.to/oeA/1AXAA00079
For More Info visit us at http://1aau.to/h/bBS/
⚠ DISCLAIMER:
While 1A Auto strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. 1A Auto is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.
√ Watch the Video
√ Buy The Part at 1A Auto http://1aau.to/m/Visit-1AAuto
√ Do it Yourself
√ Save Money
Only criticism – clean the heck out of the pistons with brake cleaner before compressing them, especially around the rubber boot. Debris gets caught in between and can rub a hole in the rubber, no bueno.
Do I need to loosen the master brake cylinder cap?
Is it really metric
Doin the fronts and rears this morning thanks for the video
Should always, no matter what replace the clips…what I was taught and the cost is nothing.. other than that great video.
Why are your brake kits so much less expensive than o’reillys? I have a 2015 Sierra and am worried I might get an inferior product.
Okay. So, how do I do these brakes without a lift? I guess I have to purchase several jack stands and blocks of wood. Please specify, someone? I have a 2015 Silverado.
Wow WHAT A GREAT VIDEO GOOD JOB!
Who let their brakes go that long?
Would a 2015 Tahoe be essentially the same procedure?
What is the price for these Rotors?