How to Replace Front ABS Sensor 2007-14 Chevy Silverado

How to Replace Front ABS Sensor 2007-14 Chevy Silverado

Buy Now!
New ABS Wheel Speed Sensor from 1AAuto.com http://1aau.to/ia/1ATRS00237

The ABS sensor relays wheel speed data to your vehicle’s computer which is uses to interpret when the vehicle is sliding or brakes are locking up. If one of the sensors in your vehicle has failed the ABS system may not function correctly. This video shows you how to install a new ABS sensor on your 2007-14 Chevy Silverado.

• Check here for more videos on the 2007-2014 Chevy Silverado: https://www.youtube.com/playlist?list=PLJVpHWuCEUX-kpHk3vmpyDsBIEnTo_H6X

This process should be similar on the following vehicles:
2007 Chevrolet Silverado 1500
2008 Chevrolet Silverado 1500
2009 Chevrolet Silverado 1500
2010 Chevrolet Silverado 1500
2011 Chevrolet Silverado 1500
2012 Chevrolet Silverado 1500
2013 Chevrolet Silverado 1500

Tools you will need:
• Pliers
• Ratchet http://1aau.to/oar/1AXAA00016
• Socket Driver
• Socket Extensions http://1aau.to/o3/1AXAA00015
• Torque Wrench http://1aau.to/oV/1AXAA00044
• 5mm Hex Socket
• Floor Jack http://1aau.to/oE/1AXAA00068
• Jack Stands http://1aau.to/oF/1AXAA00065

Subscribe: https://www.youtube.com/channel/UCWCdsftsTqYMO7cA_5Sc-yA?sub_confirmation=1

Check out our playlist:
Chevy Silverado 2nd Generation 2007-2013: https://www.youtube.com/playlist?list=PLJVpHWuCEUX-kpHk3vmpyDsBIEnTo_H6X

⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.

35,518
Like
Save


Comments

TRQ says:

Watch the Video

Buy The Part at 1A Auto http://1aau.to/m/Shop-TRQ-Parts

Do it Yourself

Save Money

Todd Albano says:

Can’t just bend the plate back to get to the bolt for the sensor plate still blocks the bolt 08 sierra

Neil Nottingham says:

Nice job kiddo! Thank you

DarlHebner says:

Are we not gonna talk about the fact he cross threaded the shit out of that lug nut?

James Parrish says:

Would you add an oil in the speed sensor hole after removal before you mount the replacement?

Chase Lyons says:

So mine isn’t straight, I have to remove my rotors to get to it.

whisky says:

You can remove the sensors without removing wheels using a ball hex Allen

Erik Metzger says:

Glad I found this video. Everyone else goes through the steps of removing the caliper and rotor to do this and I didn’t think it was necessary. Thanks for confirming that

Comments are disabled for this post.