**Check out the tools we used below. If the video was helpful, please give it a “thumbs up” and consider subscribing to the channel.**
This video goes over how to replace an oxygen sensor on a 2014 Chevy Cruze with a 1.4 motor. It should be the same process for any 2011-2015 Chevy Cruze with the same motor. An oxygen sensor is used by the engine’s computer to determine how much air to fuel ratio is needed so that the engine will run efficiently. There are oxygen sensors before the catalytic converter and sensors after the catalytic converter. The ones before the catalytic converter are called upstream and the ones after the converter are called downstream. This Chevy Cruze has two oxygen sensors, one before the catalytic converter and one after the catalytic converter. This can vary on different models and manufacturers. Some vehicles can have as many as six. You can drive a vehicle with bad O2 sensors for a period of time if you can put up with the poor performance and decreased gas mileage, but over time it will hurt the longevity of your motor and cause failure of your catalytic converter because your motor wasn’t running efficiently as the manufacturer intended. The most common signs of a bad oxygen sensor are a check engine light, decreased fuel economy, hesitation, rough idling, or misfiring.
Tools needed:
Oxygen Sensor Sockets — — https://amzn.to/2UHCgH4
Socket Set — — https://amzn.to/3A1dKAN
Penetrating Lube — — https://amzn.to/3dk6VRc
Magnetic Tray — — https://amzn.to/3xYA7oF
Parts:
Oxygen Sensor — — https://amzn.to/3jkXZ1Q
These are the tools we used or something that’s similar. There are many manufacturers and various prices. It’s a good idea to buy the better tool with the best warranty and easiest exchange in case of tool failure.
Disclaimer:
The Auto Teacher assumes no liability for property damage or injury that happens as a result of any of the information contained in this video. Any information learned from this video is to be used at your own risk. The Auto Teacher recommends safety first! Protective gloves, safety glasses and jack stands are highly recommended. These tutorials are made strictly to help people with their car projects and are given to provide factual information we’ve learned over the past 40 years working on cars. We do not guarantee any particular result or any particular warranty. Any injury, loss or damage contained by the viewer while attempting to follow the video’s instructions is solely the viewer’s fault and not The Auto Teacher.
what size was the wrench?
Thanks buddy. I like your style.
Strange how buick encore looks eerily the same. Since there isn't a Haynes auto book for the encore. I have to go on YouTube to find locations.
I got code P015B Cruze 2018 lt
Love the video
Anyone know why it’s so expensive if I would go to a mechanic?
After you replace it do you have to do anything else I heard something about plugging a computer in
Is a o2 sensor socket necessary? Looks like an open end wrench would work.
Channels like these save my butt when it comes to repairs. Thank you for this, it’ll save me a 125 dollar visit to the shop 🙂
This seems so straightforward yet ima still pay someone probably around $400-500CAD to get this done…
Do you have a video to do the downstream o2 sensor?
I got code p0420. Is it the oxygen sensor or something else?