A quick video on how to replace the license plate light bulb on a 2015 – 2020 Chevrolet Suburban.
The Chevy Suburban has two license plate lights located directly above the license plate that will eventually need to be replaced.
To replace one of these bulbs:
1. Push the light assembly toward the center of the Chevy Suburban.
2. Pull the lamp assembly down to remove.
3. Turn the bulb socket counterclockwise to remove it from the light assembly.
4. Pull the bulb straight out of the bulb socket.
5. Push the replacement bulb straight into the bulb socket and turn the bulb socket clockwise to
install it into the license plate light assembly.
6. Push the light assembly back into position until the release tab locks into place
This video tutorial will show you how to remove and replace a burned out license plate light bulb on following Chevrolet Models
2015 Chevy Chevrolet Suburban ( LS, LT and LTZ )
2016 Chevy Chevrolet Suburban ( LS, LT and LTZ )
2017 Chevy Chevrolet Suburban ( LS, LT and LTZ )
2018 Chevy Chevrolet Suburban ( LS, LT and LTZ )
2019 Chevy Chevrolet Suburban ( LS, LT and LTZ )
2020 Chevy Chevrolet Suburban ( LS, LT and LTZ )
More free automotive DIY instructions available at https://www.ProgramYourRemote.com
Find a Locksmith in your area with https://www.LocateALocksmith.com
Dirt or grease on a regular incandescent won’t hurt it – it’s the bare halogen envelopes you cannot get dirty.